A-Neu Video HD-88K Instruction Manual - page 15
13
EDID FUNCTION
EDID LEARNING MODE
Learning EDID Single to Single
Example : Learn Destination #8 EDID To Source #5.
Step 1.
Press the
EDID button
The button will flash blue and the display will show the current
Embedded EDID Status.
Step 2.
Press the
DESTINATION #8 button row
Copy the Destination #8 Display EDID.
Step 3
. Press the SOURCE #5 button row
Learning the Destination #8 EDID To Source # 5.
Step 4.
Press
ENTER button
To confirm entries.
Learning EDID Single to multiple
Learning destination EDID link to the majority Sources
Step 1.
Press the
EDID button
The button will flash blue and the display will show the current
Embedded EDID Status.
Step 2.
Press the
DESTINATIONS #1~8 button row Copy any 1~8 Destinations EDID.
Step 3.
Press the
SOURCE #1, #6 ~ #8 button row Learning the Destination EDID link to source #1, #6 ~ #8.
Step 4.
Press
ENTER button
To confirm entries.
Learning EDID Single to ALL
Learning destination EDID link to All Sources
Step 1.
Press the
EDID button
The button will flash blue and the display will show the current
Embedded EDID Status.
Step 2.
Press Destination button
1 THRU 8
Learning anyone 1~8 Destination EDID to all sources.
Step 3.
Press
ALL button
Learning selected destination EDID to all sources.
Step 4.
Press
ENTER button
To confirm entries.
EDID status
To view the current EDID status.
Step 1.
Press the
EDID button
The button will flash blue and the display will show the current
Embedded EDID Status.
Step 2.
Press the
EDID button
To exit.
How to setup FSS
®
Function
Fast Speed Start
®
Step 1.
Press the Destination
#1~8 button row
Then Press the Source
#1~8 button row
To setup and Install all devices.
Step 2.
Press the
EDID button
Select a optimum status of
Embedded EDID mode.
Step 3.
Press
ENTER button
To conform entries.
Step 4.
Press the
EDID button
To select the EDID
FSS
®
mode.
Step 5.
Press
ENTER button
To conform entries.
SINGLELEARNING#1definition
Single Learning EDID from Destination to Source
1. Switcher will LEARN destination EDID and pass the selected source.
2. To set up learning between a single destination and single source: Press
EDID button > Press DESTINATION 1 THRU 8 > Press
SOURCE 1 THRU 8 > Press ENTER to confirm. Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and Multiple sources: Press
EDID button > Press DESTINATION 1 THRU 8 >
Press the majority
SOURCES 1 THRU 8 > Press ENTER. Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press
EDID button > Press ALL button > Press ENTER to confirm.
MULTIPLE LEARNING #2 DEFINITION
Multiple Learning EDID from Destination to Source
1. Switcher will multiple LEARN destination EDID and pass the selected source.
2. To set up multiple learning between a single destination and single source: Press
EDID button > Press OFF button > Press
DESTINATION 1 THRU 8 > Press ENTER to confirm. Switcher will learn destination EDID to source device.
3. When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and the EDID
data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or
Disable the LEARNING.
A
NEU
VIDEO