A-Neu Video HD-88LA Instruction Manual - page 3
1
TABLE OF CONTENTS
CONTENTS
Introduction & Package Contents .......................................1
Features ............................................................................. 2
Specifi cations ..................................................................... 3
Front Panel ........................................................................4
Rear Panel ........................................................................7
Typical Application ............................................................8
Remote Control ................................................................10
IR Extender .....................................................................12
EDID Function ................................................................. 13
Ethernet Serial Interface ...................................................17
RS-232 Serial Interface ...................................................18
INTRODUCTION
The HD-88LA is high-performance 8x8 matrix routing switcher
for HDMI signals. This switcher supports data rates up to 6.75
Gbps, enabling 1080p HDMI formats and UXGA/WUXGA/DVI
resolution to any HD display. High Defi nition Digital signals can
be selected and distributed to any 8 outputs simultaneously. The
Switcher is certifi ed as being fully HDMI and HDCP compliant, with
RoHS,CE,FCC certifi cation. Support high resolution HDMI sources
routed to HDMI displays, monitors, projector or audio receivers.
The EDID can be selected between eight (8) different modes.
Control is provided via Front panel push buttons, IR remote or via
RS-232. An RS-232 Windows GUI interface is provided for matrix
routing.
PACKAGE CONTENTS
1. Main console Matrix Switcher unit.
2. Operating Instructions
3. RS-232 V2.0 Protocol Instructions
4. Master wireless IR Remote Control (IR-HD88LA)
5. 19 inch Ear mount bracket (Part # 2U-440L)
6. HD-100 IR Extender distance 300M (1000 ft) Receiver set
7. HD-100C IR Extender distance 2M(6ft) Receiver Cable
8. CD Contents: This manual, Windows GUI, ISP V1.0 Windows driver
9. RS-232 Cable 6 feet (2M)
10. Worldwide Universal Power Supply 12VDC, 5A 50/60Hz,
100~230 VAC
-- HD-6335R HDBaseT receivers sold separately. –
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT
NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 2011. All Rights Reserved.
Version 1.4 OCT 2013
TRADEMARK
ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.