A-Neu Video HD-88LA Instruction Manual - page 15
EDID FUNCTION
EDID FUNCTION SETUP
EDID setup
To change the EDID setup
Step 1. Press the EDID button
The display will show the currently selected EDID mode
Step 2. Press SOURCE #1 or #2 button row
The button will flash blue and the display will show the current
Embedded EDID
Status.
Step 3. Press the ENTER button
To set
EDID mode.
The switcher will return to operation mode.
Operation will abort if no keys are pressed within 5 seconds.
Embedded EDID modes
Total 8 EDID Modes
Embedded EDID setup
Press
EDID > SOURCE > ENTER
SOURCE #1
or
SOURCE #2
To select
Embedded EDID mode or LEARNING mode
Press
EDID button : The LCM will show the current EDID status.
Repeatedly depressing the
source 1 button will cycle up thru the options.
Repeatedly depressing the
source 2 button will cycle down thru the options.
Select
Embedded EDID :
Mode 1 :
FSS
Mode 2 :
H24-3D
Mode 3 :
H24-3D-M
Mode 4 :
H36-3D
Mode 5 :
H36-3D-M
Mode 6 :
DVI-D 1280x1024-60Hz
Mode 7 :
DVI-D 1920x1200-60Hz
Mode 8 :
AUTO
RESET
EDID Return To Factory default
How to RESET EDID mode
Press
EDID > RECALL > ENTER
RESET To the FACTORY DEFAULT (1080p-2CH).
Press
EDID button : The LCM will show the current EDID status.
Press
RECALL button : The LCM will show the RESET EDID.
Press
ENTER to confirm entries.
The EDID will return to
FSS mode and resolution 1080p-2CH.
LEARNING EDID
Learning EDID from Destination to Source
Learning EDID setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press
EDID > DESTINATION Button. The LCM will be show LEARNING.
Switcher will
LEARN destination EDID and pass the selected source.
13