1. DL manuals
  2. A-Neuvideo
  3. Switch
  4. ANI-1201HD
  5. Instruction manual

A-Neuvideo ANI-1201HD Instruction manual

Other manuals for ANI-1201HD: Instruction Manual
Manual is about: 12 Input Multi Format Video Switcher With HDBASE-T, VGA and HDMI Outputs

Summary of ANI-1201HD

  • Page 1

    Ani-1201hd 12 input multi format video switcher with hdbase-t, vga and hdmi outputs instruction manual frisco, texas 75034 (317) 456-2461 v.2.1.

  • Page 2

    Table of contents safety precautions please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • always follow basic safety precautions to reduce the ...

  • Page 3

    Introduction, contents, operation notice introduction this is a manual for presentation scaler switcher ani-1201hd. This manual is only for operating procedures, not for any maintenance or servicing. The functions described in this version were updated october 2011. Any changes of functions and para...

  • Page 4

    Features features ani-1201hdis a presentation scaler switcher with digital amplifi er, it is designed for multi-signal processing, signals of c-video, s-video, ypbpr, vga and hdmi can be scaled to high-resolution hdmi & vga format. It supports fi rmware updating via usb. 1. 12 channels video inputs:...

  • Page 5

    Specifications specifications video input video output input 4 hdmi 4 vga 1 ypbpr 2 c-video 1 s-video output 1 hdmi 1 vga 1 hdmi tp input connector hdmi female connector vga(15 pin hd), female connector rca female connector 4 pin mini din connector output connector hdmi female connector vga(15 pin h...

  • Page 6

    Front and rear panel front panel (1) power indicator led. It will display red when the unit is connected to power. (2) ir receive sensor for ir remote control. (3) input signal source type led status. (4) video signal source type selection buttons. Video source type (hdmi, vga, component composite a...

  • Page 7

    Video/audio description below are the detailed descriptions of inputs and outputs. Composite video and s-video input supports pal/secam/ntsc changeable aspect ratio. (full-screen, wide screen, 4:3) color rgb adjustable component input input resolution display parameter frame frequency frame frequenc...

  • Page 8

    Video/audio description cont’d hdmi input hdmi resolution support: no. Resolution no. Resolution 1 640×480@60 hz 9 1024×768@70 hz 2 640×480@72 hz 10 1024×768@75 hz 3 640×480@75 hz 11 1280×1024@75 hz 4 800×600@56 hz 12 1280×720p 5 800×600@60 hz 13 1360×768 6 800×600@72 hz 14 1920×540 7 800×600@75 hz ...

  • Page 9

    Osd operation (on-screen-display) the ani-1201hd provides a nice osd operation menu, with various functions and language. The operation introduction is: picture setting the fi rst icon from left of osd menu is to set the picture parameters. It includes the pictures mode preset, color temperature, co...

  • Page 10

    Osd operation (on-screen-display) cont’d system setting the third icon from left of osd menu is the system setting. It includes the osd language setting, audio listen only, and freeze output picture etc. Figure 3: osd system setting 8.

  • Page 11

    Ir remote description remote operation 9 menu/volume mute for line and mic audio mute. Source select 12 input channels: 4 hdmi 4 vga 2 composite video 1 s-video 1 component line volume active when not in menu mic volume active when not in menu direction and ok, these buttons are available only in me...

  • Page 12

    Rs-232 cable pins used 1. Transmission rate: 9600 bps 2. Data format: 8 data bits, no parity , 1 start bit, and 1 stop bit 3. Flowing control: none also known as 9600,8,n,1 10

  • Page 13

    Rs-232 control command introduction note: 1: the letter inside the bracket [ ] is the variable code, which is changeable. 2: the bracket [ ] is not part of the command. 3: any dot “.” after the letters is part of the command. Example 1: switch the input 2 to the line out. Rs-232 command: [2a1.] exam...

  • Page 14

    Rs-232 control command introduction cont’d 0630% check the volume level line volume: xx/mic volume: xx 0631% check the input source source: xxxxxx 0632% check the output resolution resolution: xxxxxxxx 0633% check the image mode picture mode : xx 0634% check the audio mode sound mode: xx 0635% check...

  • Page 15

    Tcp/ip controlling the tp port of ani-1201hd is used for tcp/ip control. Below is the introduction of tcp/ip control. The ani-1201hd does not have a build-in webserver for control. The tcp/ip connection requires you either send comments manually or from a third-party controller. Ip configuration 1) ...

  • Page 16

    Tcp/ip controlling cont’d after confi guration, reset the device, then you can use the new ip address for controlling. A) connection and command control 1) connect a computer and ani-1201hd to the same network. Open the net software (or any other tcp/ip communication software) and create a connectio...

  • Page 17

    Firmware updating / system diagram firmware updating the ani-1201hd supports fi rmware fi eld-updating by usb fl ash disk. Note: ani-1201hdupdatefile.Bin” fi le is provided by a-neuvideo engineering department and is not available as a public download. The procedure is as follows: 1: copy the fi le ...