1. DL manuals
  2. A-Neuvideo
  3. Matrix Switcher
  4. ANI-MOD1616
  5. Instruction Manual

A-Neuvideo ANI-MOD1616 Instruction Manual

Manual is about: ANI-MOD Series, Modular

Summary of ANI-MOD1616

  • Page 1

    Audio / video manufacturer ani-mod ani-mod series: modular matrix switcher v3.6 instruction m anual a-neuvideo.Com frisco, texas 75034 (317) 456-2461.

  • Page 2

    Safety information 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fi...

  • Page 3

    Table of contents a neu video 1 contents package contents .........................................................................1 introduction / features ....................................................................2 specifications .............................................................

  • Page 4

    2 introduction & features introduction a-neuvideo’s ani-mod series is a high-performance video and audio modular matrix switcher supporting up to 64 input and 64 output signal sources. It supports different video signals with cross switching. Every video or audio signal is transmitted and switched i...

  • Page 5

    3 specifications main unit control parts general serial control port rs-232, 9-pin female d connector power supply 100vac ~ 240vac, 50/60hz installation rack mountable temperature 14~104°f (-10 ~+40°c) pin configurations 2 = tx, 3 = rx, 5 = gnd power consumption 200w (max) front panel control button...

  • Page 6: ←

    4 ani-mod88 front panel operation ani-mod88: the front panel of ani-mod88 is shown as below. 1. Ir: ir sensor, receive ir signal sent from ir remote 2. Power indicator: illuminate red once powered on 3. Lcd screen: display real-time operation status 4. Inputs: buttons for input channels with green b...

  • Page 7: ←

    5 front & back panel front panel operation ani-mod1616/ani-mod3232/ani-mod6464: the switcher models ani-mod1616, ani-mod3232, and ani-mod6464 share the same function buttons, the only difference is the chassis height and number of i/o’s. The front panel of ani-mod1616/3232/6464 is shown as below. 1....

  • Page 8: ←

    6 front panel control front panel button control ani-mod88 users can control ani-mod88 rapidly and directly with its front panel buttons. Here is a brief operation guide to front panel buttons. Format: “input channel” + “switch mode” +“output channel” note: 1. “switch mode”: audio & video synchronal...

  • Page 9

    7 changeable cards changeable cards introduction & installation the various ani-mod chassis units are designed to work with various changeable input/ output cards, which can be installed in any ani- mod empty slot (these cards are hot-swappable). Cards are connection specific, designed to accept sig...

  • Page 10

    8 changeable cards vga signal card ani-in-vga/ani-in-va & ani-out-vga video input video output input (4) vga output (4) vga input connector female 15 pin hd output connector female 15 pin hd input level 0.5 ~ 2.0vp-p output level 0.5 ~ 2.0vp-p input impedance 75Ω output impedance 75Ω audio input aud...

  • Page 11

    9 changeable cards connect the devices via vga converting cable as shown: • connect with component video (ypbpr) source • connect with composite video (c-video) source *(4) male vga to female ypbpr cable (only included with the ani-in-vga/ani-in-va cards) *(4) male vga to female s-video & rca (c-vid...

  • Page 12

    10 changeable cards sdi signal card ani-in-sdi & ani-out-sdi input output input (4) sdi output (4) sdi input connector female bnc output connector female bnc input level 0.8vp-p ± 10% output level 0.8vp-p ± 10% input impedance 75Ω output impedance 75Ω general gain unity transmission distance 300m (m...

  • Page 13

    11 changeable cards hdbaset™ card ani-in-hdbt-4k & ani-out-hdbt-4k input output input (4) rj45 output (4) rj45 input connector female rj45 / 3.5mm mini jack for ir (3) poles captive screw connector for rs-232 output connector female rj45 / 3.5mm mini jack for ir (3) poles captive screw connector for...

  • Page 14

    12 changeable cards hdmi 4k2k card ani-in-hdmi-4k & ani-out-hdmi-4k video input audio input input (4) hdmi input (4) analog input connector female hdmi input connector 3.5mm pluggable terminal block min.~ max. Level t.M.D.S. 2.9v~3.3v input impedance 75Ω input impedance 100Ω (differential) frequency...

  • Page 15

    13 changeable cards 4k2k fiber card ani-in-4k2kf & ani-out-4k2kf input output input (4) fiber optical output (4) fiber optical input connector spf fiber optical connector output connector spf fiber optical connector fiber type multi-mode, single mode fiber type multi-mode, single mode general data r...

  • Page 16

    14 audio cards audio card ani-mod88 only input output input (8) stereo output (8) stereo input connector 3.5mm captive screw connectors (5) pole output connector 3.5mm captive screw connectors (5) pole input impedance >10kΩ output impedance 50Ω general frequency response 20hz~20khz, ±0.5db cmrr >90d...

  • Page 17

    15 remote control ir remote control with the ir remote, ani-mod could be controlled remotely. As the function buttons on the ir remote are the same with the ones on the front panel, the ir remote shares the same operations and commands with the control panel. Press the buttons under below format: “i...

  • Page 18

    16 system connection usage precautions 1. System should be installed in a clean environment and has a prop temperature and humidity. 2. All of the power switches, plugs, sockets and power cords should be insulated and safe. 3. All devices should be connected before power on. Connection diagram appli...

  • Page 19

    17 rs-232 control connection of rs-232 communication port besides the front control panel and ir remote, the ani-mod can also be controlled by far-end control system or through the ethernet control via the rs-232 communication port. This rs-232 communication port is a female 9- d connector. The defi...

  • Page 20

    18 rs-232 control remote command system from a personal computer the ani-mod matrix series can be controlled remotely from a personal computer. The control signal is brought into the ani-mod matrix through the rs-232 connector on the back panel of the unit. The commands are input through software th...

  • Page 21

    19 rs-232 commands rs-232 communication commands with this command system, users are able to control and operate theani-mod with rs-232 software remotely. Communication protocol: baud rate: 9600; data bit: 8; stop bit: 1; parity bit: none. Command types command codes functions /*type; inquire the mo...

  • Page 22

    20 rs-232 commands ani-in-dvs command types command codes functions user/i/[x]:02xx%; set the brightness of input [x] to xx, xx=00~99 user/i/[x]:03xx%; set the contrast of input [x] to xx, xx=00~99 user/i/[x]:04xx%; set the saturation of input [x] to xx, xx=00~99 user/i/[x]:05xx%; set the sharpness ...

  • Page 23

    21 rs-232 commands ani-in-va command types command codes functions user/i/[x]:0622%; set the signal of input channel [x] to vga. User/i/[x]:0623%; set the signal of input channel [x] to ycbcr. User/i/[x]:0624%; set the signal of input channel [x] to svideo. User/i/[x]:0625%; set the signal of input ...

  • Page 24

    22 communication protocol and command codes note: 1. Please disconnect all the twisted pairs before sending command edidupgrade[x]. 2. In above commands, “[”and “]” are symbols for easy reading and do not need to be typed in actual operation. 3. Please remember to end the commands with the ending sy...

  • Page 25

    23 same ip as the switcher tcp/ip control (optional) manage tcp/ip settings tcp/ip default settings: ip is 192.168.0.178, gateway is 192.168.0.1. To manage the ip address, you first need a pc that can connect to the same sub-net. Note that most modern computers will interpret the correct pins when c...

  • Page 26

    24 tcp/ip control (optional) step6. Change ip • change ip a) select the tab “internet settings: wan” to change the ip settings. B) press the button apply to save your settings. A neu video.

  • Page 27

    25 gui interface set your matrix size (model name has no affect) control switcher using cross points a neu video.

  • Page 28

    26 gui interface select from the detected available com ports or select connection via tcp/ip a neu video.

  • Page 29

    27 safety operation guide troubleshooting & maintenance safety operation guide to insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. • unpack the equipment carefully and save the original box and packing material ...

  • Page 32

    30 end of document terms and conditions of use please read the following terms and conditions carefully before using this hardware, components and software provided by, through or under a-neuvideo, inc (collectively, the “product”). By using installing or using the product, you unconditionally signi...