A-Neuvideo ANI-MOD1616 Instruction Manual - ←
6
FRONT PANEL control
Front Panel Button control
ANI-MOD88
Users can control ANI-MOD88 rapidly and directly with its front panel buttons. Here is a brief operation guide to front panel buttons.
Format:
“Input Channel” + “Switch Mode” +“Output Channel”
Note:
1. “Switch Mode”:
Audio & Video synchronal (AV) or separate switching mode (Audio/ Video)
2. “Input Channel”:
Fill with the number of input channel to be controlled
3. “Output Channel”:
Fill with the number of output channels to be controlled. Press
“All” to select all the outputs
4.
The input/output channels on the rear panel are counting from left to right, top to bottom
5.
The input delay time between (2) numbers of every input & output channel must be less than (5) seconds; otherwise the operation
will be cancelled.
Example:
1. To transfer input (1) to output (11), press input
“1”, output “0” “1”.
2. To transfer signals from input (1) to all output channels, press buttons in this order:
“1”, “All”.
Functional Buttons:
UNDO Button:
return to the previous status
Example: Input (6) is connecting with output (6), press input “6” + “AV”+ output 4 to change the connection. Press “Undo” to
enable input (6) to reconnect with output (6).
←
Button:
If you press buttons
“1”, “AV”, “2”, “←” in order, then “2” will be canceled.
THROUGH Button:
get straight I/O connection, e.g. input 1 > output 1, input 2 > output 2. Press
“Input Channel”+”Through”
Example: If you press buttons “ALL”, “THROUGH” in order, then the result will be like input 1 > output 1, input 2 > output 2,
input 3 > output 3 … input 8 > output 8.
ANI-MOD
Users can control the ANI-MOD rapidly and directly with its front panel buttons. To switch AV/ A/ V signal, please operate the buttons under
the following format:
Format:
“Input Channel” + “AV” +“Output Channel”+“enter”
Note:
1. “Switch Mode”:
Audio & Video synchronal (AV) or separate switching mode (Audio/ Video)
2. “Input Channel”:
Fill with the number of input channel to be controlled
3. “Output Channel”:
Fill with the number of output channels to be controlled. Press
“All” to select all the outputs
4. “,” Button:
Use to separate multiple I/O channels, and press
“eNTeR” button to confirm the operation
5.
The input/output channels on the rear panel are counting from left to right, top to bottom.
6.
The input delay time between (2) numbers of every input & output channel must be less than (5) seconds; otherwise the operation
will be cancelled.
Example:
1. To transfer input (1) to output (11), press input
“1”, output “0” “1”.
2. To transfer signals from input (1) to all output channels, press buttons in this order:
“1”, “All”.
Functional Buttons:
UNDO Button:
return to the previous status
Example: Status 1: Input 6 > output 6
Press input
“6” + “AV”+ output 4 to change the connection. Press “Undo” to return to Status 1.
←
Button:
Backspace the last operation
Example: If you press buttons “1”, “AV”, “2”, “←” in order, then “2” will be canceled.
THROUGH Button:
Get straight I/O connection, e.g. input 1 > output 1, input 2 > output 2.
Format: “Input Channel”+”Through”
Example: If you press buttons “ALL”, “THROUGH” in order, then the result will be like input 1 > output 1, input 2 > output 2,
input 3 > output 3 … input 16 > output 16.
A
NEU
VIDEO