A+V Link Technologies AVM-6995H-SYS-A1 Quick Setup Manual - 1. Powerhdlink Kit Cotents
A+V Link Technologies
PowerHDLink Quick Setup Guide
©2011 Copyright by A+V Link Technologies, Corp.
Version 1.0
2
1. PowerHDLink Kit Cotents
The PowerHDLink kit contains the equipment below. If any components are missing or damaged,
contact your dealer immediately.
Package Contents
A. PowerHDLink
Transmitter
B. PowerHDLink
Receiver
C. Power
Cord
(x2)
D. IR
Blaster
cable
E. Remote
Control
F. HDMI
Cable
(x2)
In addition to the kit, Ethernet CAT 5/5e/6 cables, a video player (DVD player, Blu-Ray player etc.)
and a TV (HDTV or Standard TV) are needed.
Note 1
: “TX” and “RX” may be substituted for “Transmitter” and “Receiver” (respectively) throughout
this manual.
Note 2
: Power Cord specifications will vary, depending on country or region.
2. Quick Setup Guide
This chapter describes how to get your PowerHDLink environment quickly installed. After the setup,
you will be able to view video that is streaming from a video player to a TV anywhere in your
office/home. For this setup you will also need:
TV (Standard or HDTV) with HDMI, YPbPr or CVBS connectors
Video player (e.g. Blu-Ray player, DVD player) with HDMI, YPbPr or CVBS/S-Video connectors
Two available Ethernet outlets.
IMPORTANT
: There are several models referencing this User Manual. They vary in features,
according to the table below. You will need to disregard those features mentioned in this manual that
do not apply to your specific model.
Model number
HDMI
YPbPr
CVBS/S-Video
AVM-6995H-SYS-A1, AVM-6996H-SYS-A1
9
9
9
AVM-6995H-SYS-A3, AVM-6996H-SYS-A3
9
B
F
E
D
C
A