Aaeon 7” (Q)TFT LCD MONITOR User Manual - 5. Front Panel Control
5. Front Panel Control
POWER Press the power button to activate the monitor or to keep the monitor
under stand by mode.
SOURCE With power on press this button to select image sequence CAM A+B
ÆCAM C+RÆCAM AÆCAM BÆCAM CÆCAM RÆCAM A+B…,
With pull hand break, press this button to select image sequence
AV
ÆCAM A+BÆCAM C+RÆCAM AÆCAM BÆCAM CÆCAM RÆAV…
.
JUMP Press this button to display defined camera input, user can select
QUAD / CAM A+B / CAM C+R / CAM A / CAM B / CAM C / CAM R
via OSD as default value.
MENU This encoder switch provides the following function:
1. Activate OSD menu: Press the switch to activate the OSD menu.
After the OSD menu is activated, in case the user does not proceed
for further set up, the OSD menu will then automatically turn off within
several seconds.
2. Enter Function: Press the encoder switch to act as “Enter” : functions
under the OSD menu.
3. Volume Value: Exit the OSD menu, user can turn this switch left or
right to adjust the volume value.
*When pull the hand break, user need to press SOURCE button again to display
AV picture.
10