1 user manual aero ae-1 user manual rev. 1.0.3 congratulations! You are now the owner of an aero ae-1 wireless controller! The aero lets you control the parameters and presets of existing and future aalberg audio effects pedals. Like the ek-1 ekko tm delay pedal, ro-1 rom tm reverb pedal or the tr-1...
2 included in this package: aero ae-1 wireless controller quick start guide usb charging cable velcro pads - 1 black, 1 transparent surface cleaner sachet mounting clip getting started you can attach the aero to your guitar strap or belt using the included clip with velcro. Alternatively, you can mo...
3 controls on/off turn the power on/off presets store/recall your favorite settings including: parameter levels, bypass status for pedal (on/off), active parameter for wireless control (fx- select) - store: press and hold one of the three preset buttons (‘i’,’ii’ or ‘iii’) for 2 seconds (pedal will ...
4 for 2 seconds to toogle between bypass on and off (*the pedal with an active parameter lit up) usb input use the attached usb-cable to charge your aero’s rechargeable battery using a standard 5v cell phone charger or one of the usb ports on your computer.
5 overview.
6 specifications power 5v rechargeable lithium-ion polymer battery, 200 mah (typical) battery life up to 30 hours battery charging time approx. 2 hours range (wireless transmission) up to 30 meters (98 feet) connector usb input (micro usb) for battery charging controls presets (i, ii, and iii), prev...
7 battery the aero uses a 5v rechargeable lithium-ion polymer battery. We recommend that you charge the battery fully before first time use. The charging time is approx. 2 hours. You can charge it through the usb-input found on the back of the aero using a standard micro- usb cable (included in the ...
8 software update app not ready yet! Estimated ready: after summer 2015 running software updates on your wireless aalberg audio product is easy: 1. Set your aalberg audio pedal in update mode: a. Unplug power jack b. Press and hold on/off and fx-select footswitches simultaneously then plug in power ...
9 wireless control – pairing currently: one aero-one pedal communication only! One aero – multiple pedals ready after summer 2015 in order to control your aalberg effects pedal using the aero wireless controller (optional) you need to pair the devices. Below is a step-by-step guide: 1. Set your devi...
10 iv. Next to lowermost led in mid row lights up when aero in pairing mode is detected v. Repeat step i-iv for any additional aalberg effects pedals 2. Confirm pairing: a. When you have repeated the above steps for all of your aalberg pedals, you need to press and hold the rotary knob button for 3 ...
11 disclaimers all use of our products is undertaken at your own risk and expense and aalberg audio cannot be held liable for any direct or indirect losses or cost incurred through use, default or malfunction of our products. Repair or replacement of defective units under our warranty provisions ser...
12 product needs to be accompanied by a copy of your receipt, serial number, return address, phone number, e-mail address and a brief explanation of the problem. If the product is altered or repaired by someone unauthorized by aalberg audio the warranty is no longer valid. Stores and distributors mu...
13 history the inspiration for the delay pedals with wireless controller came to guitar player and inventor rune aalberg alstad back in 2009, when he was tired of having to run over to the pedals and bend down all the time to change the effect settings. Five years later, after lots of testing and pr...
14 ipr-related design protection pending in eu & usa international patent pending pct/no2014/050236 compliance aalberg audio accept and follow these regulations and directives. About aalberg audio aalberg audio as is located in trondheim, norway. We produce wireless guitar effects with accompanying ...
15 www.Aalbergaudio.Com trondheim norway ™ and © 2015 aalberg audio as. All rights reserved. The information in this manual is subject to changes without further notice..
