Aalberg Audio Aero AE-1 User Manual - page 9
9
WIRELESS CONTROL – PAIRING
CURRENTLY: ONE AERO-ONE PEDAL COMMUNICATION ONLY!
ONE AERO – MULTIPLE PEDALS READY AFTER SUMMER 2015
In order to control your Aalberg effects pedal using the AERO wireless controller
(optional) you need to pair the devices.
Below is a step-by-step guide:
1. Set your devices in pairing mode:
a. AERO:
i. Turn off the AERO (slide switch set to ‘0’)
ii. Press and hold rotary knob button and left button* simultaneously, then
turn the AERO on (slide switch set to ‘I’)
iii. The AERO LED starts blinking (red) to indicate that the AERO is in pairing
mode
b. Aalberg effect pedal:
i. Unplug power jack
ii. Press and hold FX-SELECT then plug in power jack
iii. Lowermost LED in mid row starts blinking to indicate that the pedal is in
pairing mode
*