AAON AA-EBUS-DRS-TGD-01K Technical Manual - page 7
E-BUS Digital Room Sensor Technical Guide
SENSOR SCREENS
7
Setpoint Adjust Screen
Touching <> or <> will dis-
play the Setpoint Adjust Screen.
You can adjust the cooling and
heating setpoints from this screen
based on the VCC-X / VCCX2 or
VCB-X Controller slide offset
setpoint. For example, if the
connected controller’s Max Slide
Offset Setpoint is set for fi ve, you
can adjust the setpoint up fi ve
degrees and down fi ve degrees.
NOTE: If the Unit Controller’s slide offset setpoint is set to Zero,
this screen will not appear when you touch <> or <>.
Figure 9: Operation Mode Screens
Cooling Mode
with Snowfl ake Icon
Heating Mode
with Flame Icon
Vent Mode
with Fan in Motion Icon
Figure 8: Setpoint Adjust
Screen
Unoccupied Mode
with Moon Icon
Operation Modes
Refer to Figure 9 for operation mode screen examples. The different
icons shown are a Snowfl ake for cooling mode, a Flame for heating
mode, a Fan in motion for vent mode, and a Moon for unoccupied
mode. When the unit is in unoccupied mode, the screen’s background
will turn dark.
LCD Display Screens