AAS Ascent X1 Quick Start Manual - Quick Start
4 of 4
QUICK START
GUIDE
3a
Connect wires to unit as shown in
Step 3.
3b
Connect wires to your power source,
making sure you connect positive to
positive and negative to negative.
CAUTION!
Double check that you’ve wired from
positive on Ascent to positive on your
power source and negative on Ascent to
negative on your power source.
Reverse polarity can damage Ascent!
1
Push existing SIM card in until it
unlocks with “click” sound.
2
Remove existing SIM card and locate
new SIM card.
3
Insert new SIM card until it locks in
place with “click” sound.
Installing a
Third-Party
SIM Card
(Optional)
Using a
Third-Party
Power Source
(Optional)
IMPORTANT!
r
If you would like to use a third-party
power source, such as solar, verify that
it conforms to the following specs:
Input
12–24 VAC/DC
no more than 10% under or over
Current Draw
less than
1
90 mA @ 12 VDC
less than
1
60 mA @ 24 VDC
?
NEED HELP
Call us at
(844) 259-8265
or
s
upport@s
ummitcontrol.com
We are available
Mon–Fri
/
8am–5pm Central
© 2016 Security Brands, Inc.
QSG-16X1-EN Rev. F (11/2016)