AAS EPOC-POE-100-IP User Manual - Technical Specifications
5
Technical Specifications
..
Kit Model
EPOC-POE-100K
Model
EPOC-POE-100-SV
EPOC-POE-100-IPC
Application Location
Host/Server Side
Camera Side
Power Supply
From PoE switch or
power supply
Powered by
EPOC-POE-100-SV
through coaxial cable
Voltage Range
48V~57V DC
Power Consumption
Power Voltage
48V-57V
N/A
Output Voltage
N/A
12V DC
Ethernet Port
EPOC Port: 0~100Mbps ; Ethernet Port: 10/100Mbps
Transmission Distance
Coaxial Cable: 500m / 1600ft (max.)
Network Cable: 400m / 1300ft (max.)
Transmission bandwidth changes with transmission distance**
(refer to Table 1 and Picture 1)
Transmission Medium
75-5 Above Coaxial Cable and CAT5e/6
PoE Agreement
Support IEEE802.3af, IEEE802.3at
PoE Power Supply
Support End-span and Mid-span
Ethernet Standard
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
Ethernet Delay
LED Status Indicator
PoE IN/OUT Port: One indicates PoE switch or DC power
status (RJ45 yellow), one indicates Ethernet signal
transmission (RJ45 green);
EPOC Port: Indicates signal transmission (RJ45 yellow/green)
ESD Protection
1a Contact Discharge 3 Level
1b Air Discharge 3 Level
Per: IEC61000-4-2
Communicating Port
Anti-thunder Protection
Per: IEC61000-4-5 level 3
MTBF Stability
> 30,000h
Working Temperature
32°F ~ 131°F / 0°C ~ 55°C
Storage Temperature
-40°F ~ 185°F / -40°C ~ 85°C
Humidity (non-condensing)
0~95%
Dimensions (L x W x H)
82 x 63.2 x 25 mm / 3.23 x 2.49 x 0.98 inches
Net Weight
153g / 5.4oz
154g / 5.43oz
*Specifications are subject to change without notice
Troubleshooting
..
•
Please confirm if the installation is correct.
•
Please confirm if the RJ45 cable order is in accordance with the EIA/TIA568A or 568B
industry standards (Refer to page 7).
•
The maximum transmission distance is depends on the signal source and cable quality;
do not exceed the maximum transmission distance.
•
Please replace a normal device with a faulty one to check if the device is broken.
•
If the problem still exists, please contact supplier.