AAS LCD35SV User Manual - Operation
5
Operation
..
Boot up:
Switch the System Reset Switch to the ON position. Press the Power “On” & “Off” Push Button
for 1 second. The power LED indicator will be on and boot into the main menu.
When there is no video input, it will enter the blue screen mode or standby mode. When there
is video input, the video will be shown on the screen.
Shutdown:
Hold the Power “On” & “Off” Push Button for 1 second. The message “GOODBYE” will appear
and it will shut down. When there is no video input for 3 minutes, it will power off automatically.
Audio and Video Input:
Use the Video & Audio Cable w/ BNC Connector and plug into the USB-A port, RCA video and
audio connection. Audio is detected and automatically turns on when the cable is connected. It
turns off when the cable is disconnected.
Emergency 12V Output:
Use the Audio & Video Cable w/ BNC Connector and plug the DC line you want to take the first
insertion device. Press the function key.
The 12V Multi-function LED red light will turn on. 12V maximum output current is 800mA. It has
output over-voltage and over-current protection.
NOTE:
The maximum output current is 12V DC 800mA. The output has over-current, over
voltage and short circuit protection functions.
Do not use high power IR cameras because it
will overload and damage the power module.