AAS LCD35SV User Manual - Technical Specifications
6
Charge:
This device uses the 18650 lithium battery. When the electric quantity of the battery is below
3.3V, the power LED indicator light will flash, indicating that the device can hold for one hour. At
this time, you should charge the device as soon as possible by inserting the matching charging
cable into the USB port and the other end into the matching charger.
When charging, the battery LED indicator
will lit green. When the charge is full,
approximately 4~5 hours, the
indicator will turn off or turn red. The Lithium battery
contains a chip that is used to provide protection and prevent over charging and
over-discharging.
According to USB compatibility, use a high-quality cell phone charger (do not use low-quality cell
phone charger), or plug it into a computer's USB port to charge the equipment.
Technical Specifications
..
Model
LCD35SV
Display
TFT 3.5 inch
Shell Materials
Engineering ABS plastic
Battery
18650 lithium battery 3.7V DC, 2200mA
Power Consumption
0.6W (12V emergency power does not open)
Charger
110~220V AC / 5V DC / 1000mA
Emergency Power Output
12V DC / 800mA
TV System
PAL / NTSC
Display Format
RGB 320 x 240
Operation Time
6 hours
Video Input
1.0 Vp-p
Audio Input
0.7 Vp-p
Automatic Sleep Mode
2~3 minutes
Operating Temperature
5
°
C ~ 50
°
C / 41
°
F ~ 122
°
F
Dimension
92 x 73x 27 mm (shade cover part is 40 mm)
3.62 x 2.87 x 1.06 inches (shade cover part is 1.57 inches)
Weight
120 g / 4.2 oz
*Specifications are subject to change without notice