Aastra Vista 150 User Manual - Ensuring Privacy
11
Vista User Guide
Set indicator light messages
Ensuring privacy
Vista 150’s red display light comes ON and Extension in use appears on the display
when another person in your home picks up an extension. The light remains ON until the
other person hangs up.
Saving ON and OFF keys
The following examples show you how to save an ON and an OFF key and activate Vista’s
light for a local telephone company feature.
To save ON and OFF keys for a local telephone company feature without the light, omit
step 2 from the above examples. Your Vista may be programmed with only one ON and
one OFF key.
Note: The feature in use light may be preprogrammed (see Quick Reference Card). Once
the feature ON and OFF codes have been assigned to two keys, other features will not turn
the light ON and OFF.
Lights
What it means
Priority
Solid
Extension in use or Check phone cord appears on display.
Highest
Fast Flash
Visual ring indicator for incoming calls.
High
Slow Flash
Message waiting (with voice mail services only).
Low
Note: The light and display will always indicate the highest priority condition.
To save a Call Forwarding ON key:
To save a Call Forwarding OFF key:
1.
Press
ß
.
1.
Press
ß
.
2.
Press
⁄ to program the light ON.
2.
Press
‚to program the light OFF.
3.
Press
}
and the desired mem-
ory key.
3.
Press
}
and the desired
memory key.
4.
Press
• ‡¤ for turning Call Forward-
ing ON.
4.
Press
• ‡‹ for turning Call Forward-
ing OFF.
5.
Read the display to confirm the num-
ber. If the number is wrong press
and begin again.
5.
Read the display to confirm the num-
ber. If the number is wrong press
and begin again.
6.
Press
ß
again.
6.
Press
ß
again.
7.
Write Call Forwarding ON on the
receiver card (in pencil). The light is
now programmed but will not come ON
until you use the feature.
7.
Write Call Forwarding OFF on the
receiver card (in pencil).
k
k
k
k ll
l
l
k
k
k
k ll
l
l