AAT MAX-E Q1604 Translation Of The Original User Manual - page 2
02
D
GB
CE-Konformitätserklärung
Die Firma AAT Alber Antriebstechnik
GmbH erklärt hiermit, dass der max-e
den einschlägigen Bestimmungen der EG-
Richtlinie 2006/42/EG, 2007/47/EG und
93/42/EG entspricht.
Bei einer nicht mit der Firma AAT
Alber Antriebstechnik GmbH abge-
stimmten Änderung des max-e, verliert
diese Erklärung ihre Gültigkeit.
Herstellerunterschrift:
Markus Alber
(Geschäftsführer)
Das Antriebssystem max-e wurde bei
der Prüf- und Zertifizierstelle Berlin-Cert
an der Technischen Universität Berlin
nach den Normen DIN EN 12182 und
DIN EN 12184 erfolgreich geprüft.
AAT Alber Antriebstechnik GmbH
Postfach 10 05 60 · D-72426 Albstadt
Tel.: +49.(0) 74 31.12 95-0
Fax: +49.(0) 74 31.12 95-35
info@aat-online.de · www.aat-online.de
08/2016 (3.1)
CE-Declaration of conformity
The company AAT Alber Antriebstechnik
GmbH herewith declares that the max-e
is conform to the current regulations
of the European Union, EEC Guidelines
2006/42/EG, 2007/47/EG and 93/42/EG.
This declaration becomes void, if the
max-e has been altered without the
consent of AAT Alber Antriebstechnik
GmbH.
Signature of the manufacturer:
Markus Alber
(Managing shareholder)
The powered drive system max-e has been
successfully tested according to the
standards DIN EN 12182 and DIN EN
12184 at the Technical University of
Berlin, Berlin-Cert.