AAT MAX-E Q1604 Translation Of The Original User Manual - page 54
54
GB
7.3 Troubleshooting
Problem
Check and potential solution
max-e cannot be turned on
Is the charger connected to the max-e?
Yes? disconnect the charging cable and plug in
the power cable.
Is the battery pack empty?
Yes? Charge it.
Is the fuse defective?
Yes? Excharge IT.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
max-e does not drive
Is the charger still plugged in?
Yes? Unplug it.
Is the max-e still turned on?
No? Turn it on.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Battery pack doesn’t charge
Is the charger connected?
No? Connect it properly.
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Power shafts do not emerge on one
or both sides)
Loosen set screw of the horizontal adjustment
(located directly on the housing) and screw it
tight again (check the mounting width).
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!
Pressure is not reached
Loosen set screw of the horizontal adjustment
(located directly on the housing) and screw it
tight again (check the mounting width).
Problem still there?
Yes? Contact the manufacturer or authorized
personnel!