AB-COM IPBox 250S PVR User Manual - page 18
18
9. BEFORE SETTING
9.1 Menu Information
Selectable lines are generally activated (highlighted). No-activated lines are not selectable.
Most of OSD- menus show short information at the bottom of the screen.
9.2 Basic Key Control
With the UP/DOWN direction button you can move the cursor upwards and downwards in the OSD
(On Screen Display)- menu. In most of menus, you can search channels with these buttons.
When you have reached the desired option or function, press the OK button to confirm your choice.
In case of changing TV channel you can only press UP/DOWN direction button.
In most of menus, you can select menu items with LEFT/RIGHT direction button.
When you want to return to the previous menu with saving the change, press the MENU Button.
When you want to exit from the current menu, press the EXIT button.
10. GET STARTED FOR THE FIRST TIME
If it is the first time using the STB, you should set parameters for system configuration and scan the
satellites. Follow setup procedure for scanning the satellite. When you have finished the procedure,
you can start watching TV or listening to the Radio.
10.1 Switch your TV and STB On.
The Local Time setting menu will appear automatically.
10.2. Adjusting the local time.
Press LEFT/RIGHT buttons to find your area on Time Zone and select Daylight-saving (summer
time) ON or OFF .Since the Date and time are not selectable, leave them as they are. When the
channel search is complete, the date & time info will be set automatically with the data brought from
the Satellites. To save the settings you made, press MENU/ EXIT button on RCU.