AB-COM IPBox 250S PVR User Manual - page 19
Manual is about: Digital
of
78
19
10.3. LNB setting.
The LNB Setting menu will appear automatically right after adjusting the Local Time. Select the
Number of LNBs(number of satellites that you wish to search) by pressing right direction button
on the RCU, then press OK button to setup each LNB.
10.3.1. Set each LNB parameter.
SAT Name, LNB Type, Local Freq, DiSEqC Ver, DiSEqC No, 22 KHz, and TP Freq by
pressing LEFT/ RIGHT button as your LNB and dish aimed. You can see whole
selectable values of each item by pressing OK button. You will see the Signal indicator as
yellow if all values are set correctly.