Ab Naída CI Q70 User Manual - page 4
Step 2
Connect the Universal Headpiece (UHP) and/or verify proper headpiece connection:
Verify that the headpiece cable is plugged into the UHP and Naída CI. Check that the cable is not twisted or frayed. Inspect the cable
on a regular basis to ensure it is in good condition. If it appears damaged, replace it with a new cable.
Hold the UHP in one
hand and the headpiece
cable in the other hand.
Hold the Naída CI in one
hand and the headpiece
cable in the other hand.
Push the headpiece cable
firmly into the UHP.
Push the headpiece cable
straight into the Naída CI
connector port.
Attaching the headpiece cable to the Naída CI:
Attaching the headpiece cable to the UHP:
1
1
2
2
Step 1 cont.
Attaching the Battery
1
2
3
Hold the Naída CI sound
processor in one hand. Rotate the
cable upward to avoid bumping it
upon battery placement.
Align the battery with
the Naída CI housing side
of the connector.
Slide the battery onto the
Naída CI until it clicks
into place.
Step 3
Verify the correct program is selected:
The Naída CI will always default to program 1 when it is powered on. If P1 is the child’s everyday program, no further changes
are necessary.
Tools for Schools™ Program Resources
4