Ab Naída CI Q70 User Manual - page 8
Naída CI Q70 Sound Processor LED Indications
Orange
Red
Green
•
4 quick blinks indicate that the battery is fully
charged
•
2 - 3 quick blinks indicate that the battery is
sufficiently charged to power the Naída CI
•
1 quick blink indicates that the battery is nearly
depleted
•
No blinking indicates depleted battery. Replace with
charged or new battery
Blinks at start-up
Solid
The battery is almost depleted
Blinks twice every three seconds
The battery is almost depleted and cannot support stimulation (Sleep Mode)
Fades out
The Naída CI is entering Standby Mode
Color
Behavior
Indication
Blinks once per second
Loss of lock with the implant
Blinks rapidly
(more than once per second)
Intellilink™ feature enabled and the Naída CI is connected to the wrong
implant
Solid
Sound processor error condition. Fully remove and re-insert the battery to reset processor
Blinks five times
Response to the AB myPilot remote control request to ‘Find Paired Devices’. The Right paired device will
identify itself with this LED pattern.
Flickers in response to loud inputs
The sound processor and microphone are responding to sound
Blinks at start-up, after battery
status, and upon program change
•
1 blink indicates program one
•
2 blinks indicate program two
•
3 blinks indicate program three
•
4 blinks indicate program four
•
5 blinks indicate program five
Solid
A processor that is not yet programmed
Blinks four times
Response to the AB myPilot request to ‘Find Paired Devices’. The Left paired device will identify itself with this LED
pattern.
INDICATORS FOR STATUS CHECK AND TROUBLESHOOTING
Feature
Color
Battery Status
Orange
Microphone Status
Green
Program Position
Green
CI Status
Red
Tri-Color Light Emitting Diode (LED)
The Naída CI is equipped with a built-in Light Emitting Diode (LED) Status
Indicator. The LED is a diagnostic light that provides caretakers and teachers
with information regarding the functionality of the Naída CI. The LED is located
in the middle of the Volume Control and can be programmed to provide the
following information:
Bilateral Initialization
It is no longer necessary to label processors as right side and left side. The Naída CI sound processor can detect which ear
it is worn on automatically and provide access to the appropriate programs for that ear (the feature must be activated by
an audiologist).
Intellilink™ Safety Feature
Intellilink is an important safety feature for AB recipients that ensures a sound processor only stimulates the correct internal
device. It prevents accidental stimulation from a processor that attempts to communicate with the incorrect implant.
Tools for Schools™ Program Resources