AB Quality 1769-L31 CompactLogix Installation Instructions Manual - page 20
20
1769-L31 CompactLogix™ Controller
Publication 1769-IN069A-EN-P - March 2004
2.
Remove the card and insert it into a controller that you want to have the
same firmware and controller user program.
3.
When you power up the second controller, the image stored on the
CompactFlash card is loaded into the controller.
Select the Controller’s Operating Mode
Use the keyswitch on the front panel of the controller to determine the controller’s
operating mode.
Keyswitch
Position
Description
RUN
•
Upload projects.
•
Run the program and enable outputs.
•
You cannot create or delete tasks, programs, or routines. You cannot create or delete tags
or edit online while the keyswitch is in the RUN position.
•
You cannot change the mode using the programming software while the keyswitch is in
the RUN position.
PROG
•
Disable outputs.
•
Upload/download projects.
•
Create, modify, and delete tasks, programs, or routines.
•
The controller does not execute (scan) tasks while the keyswitch is in the PROG position.
•
You cannot change the mode through the programming software while the keyswitch is in
the PROG position.
REM
•
Upload/download projects.
•
Change between Remote Program, Remote Test, and Remote Run modes through the
programming software.
Remote Run
•
The controller executes (scans) tasks.
•
Enable outputs.
•
Edit online.
Remote Program
•
Disable outputs.
•
Create, modify, and delete tasks, programs or routines.
•
Download projects.
•
Edit online.
•
The controller does not execute (scan) tasks.
Remote Test
•
Execute tasks with outputs disabled.
•
Edit online.