Abarth Grande Punto Owner's Handbook Manual - page 147

146

W

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

IINDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

IF AN INTERIOR LIGHT

BURNS OUT

For the type of bulb and power rating, see

“When needing to change a bulb”.

FRONT CEILING LIGHT

To replace the bulbs proceed as follows:

❒ work in the points shown by the ar-

rows and remove light A-fig. 26

❒ open the protection lid B;

❒ change the bulb fig. 25 releasing it from

the side contacts and making sure the

new bulb is correctly fastened between

the contacts;

❒ refit the snap-fitted lens unit.

fig. 26

F0M0213m

fig. 27

F0M0234m

fig. 25

F0M0233m

❒ replace bulbs C-fig. 27 releasing them

from the side contacts; make sure that

new bulbs are correctly clamped be-

tween contacts;

❒ re-close the lid B-fig. 27 and secure light

A-fig. 26 into its housing locking it

properly.

133-160 Abarth GB:133-160 Abarth GB  22-09-2009  13:28  Pagina 146