Abarth Grande Punto Owner's Handbook Manual - page 148

147

W

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

BOOT LIGHT fig. 28

To change the bulb, proceed as follows:

❒ open the tailgate;

❒ remove the light A levering in the point

shown by the arrow;

❒ open the protection B and replace the

snap-fitted bulb;

❒ re-close the protective cover B on the

lens;

❒ refit the light A inserting it in its cor-

rect position firstly on one end and

then on the other until it clicks into

place.

PUDDLE LIGHTS

(for versions/markets, 

where provided) fig. 29-30

To change the bulb, proceed as follows:

❒ remove the light by pressing clip A with

a screwdriver;

❒ press the bulb protection cover sides

B on the two fastening pins and turn it;

❒ replace the snap-fitted bulb C;

fig. 28

F0M0216m

fig. 29

F0M0217m

fig. 30

F0M0229m

❒ refit bulb protection cover fitting the

two fastening pins;

❒ refit the ceiling light inserting first end

D and then pressing the other end un-

til hearing the locking click of the clip.

133-160 Abarth GB:133-160 Abarth GB  22-09-2009  13:28  Pagina 147