Abb drives for hvac quick start-up guide ach580 drives with hvac control program english. . . . . . . . 3 abb drives for hvac quick start-up guide ach580 drives with hvac control program r0- r4 en ach 00a start-up cover_en.Fm page 1 friday, september 22, 2017 3:52 pm en english ............ 3.
© 2017 abb oy. All rights reserved..
En – quick start-up guide this guide describes how to start-up the drive using the first start assistant on the hand-off-auto control panel. For complete information on start-up, see ach580 firmware manual (3axd50000027537 [english]). Note: automatic selection of supply voltage is not supported in a...
1 – first start assistant guided settings: language, date and time, and motor nominal values have the motor name plate data at hand. Power up the drive. The first start assistant guides you through the first start-up. The assistant begins automatically. Wait until the control panel enters the view s...
To select a value in an edit view: • use and to select the value. Press (save) to accept the new setting, or press (cancel) to go back to the previous view without making changes. Set the date and time as well as date and time display formats. • go to the edit view of a selected row by pressing . • ...
Check that the motor data is correct. Values are predefined on the basis of the drive size but you should verify that they correspond to the motor. Start with the motor type. • go to the edit view of a selected row by pressing • scroll the view with and . Motor nominal cos Φ and nominal torque are o...
Check the direction of the motor. If it is forward, select yes, motor is spinning forward and press (next) to continue. If the direction is not forward, select no, fix direction and press (next) to continue. The first start is now complete and the drive is ready for use. Press (done) to enter the ho...
In the main menu, select primary settings and press (select) to enter the primary settings menu. Select hvac quick setup and press (select) (or ). Go through the items on the menu. To adjust the value of a parameter, press (edit), adjust the value using , , and keys and press (save). Note that the a...
Select a connection you want to check and press (se- lect) (or ). To view the details of a parameter that cannot be adjusted via the i/o menu, press (view). To adjust the value of a parameter, press (edit), adjust the value using , , and keys and press (save). Note that the actual wiring must match ...
4 – diagnostics menu use the diagnostics menu to make sure that the setup is functioning correctly. In the main menu, select diagnostics and press (se- lect) (or ). Select the diagnostics item you want to view and press (select). Return to the diagnostics menu by pressing (back). 10 en – quick start...
Further information product and service inquiries address any inquiries about the product to your local abb representative, quoting the type designation and serial number of the unit in question. A listing of abb sales, support and service contacts can be found by navigating to www.Abb.Com/searchcha...
Contact us www.Abb.Com/drives 3axd50000047658 a (en) effective 2017-10-11 3axd50000047658a.
