ABB i-bus KNX SUG/U 1.1 Product Manual - page 17
Manual is about: Split Unit
of
56
ABB i-bus
®
KNX
Commissioning
SUG/U 1.1 | 2CDC508171D0201 15
3.2
Parameters
The ETS Engineering Tool Software is used to parametrize the device.
In ETS, the application appears in the
Catalogs
window under
Manufacturers/ABB/Heating Air conditioning
Ventilation
.
In addition to the ETS application you will require the "ABB SUG/U 1.1" app for commissioning; this can be
obtained free from the KNX Online Shop.
The following chapters describe the device parameters using the parameter windows. Parameter windows
are structured dynamically so that further parameters are enabled depending on the parametrization and
the function.
The default values of the parameters are underlined, e.g.:
Options:
Yes
No