ABB VD4 Series Instruction Manual - page 17
Instruction manual 534/01 | VD4 Vacuum-circuit-breaker 17
3.3
Wiring diagrams for C.B. on withdrawable part
Note:
The wiring diagrams comprise the basic com ponents and
all further equipment options for the various VD4 types. The
scope of equipment possible within an individual type series is
listed in the relevant switchgear list, and the euquipment fitted
in each individual case can be found in the order documen-
tation.
Note:
Please see section 8.5 for explanation to the withdrawable
part
Figure 3/8: Wiring diagram for VD4 vacuum circuit-breaker
on manually movable withdrawable assembly.
- Type A of withdrawable part
- Maximum of equipment
- Control wiring plug 58-pole
- Use in panel system ZS, in powerbloc and
mounting frame
- Drawing no. GCE2032404
See page 43 for comparison of VDE/IEC designa