This page intentionally left blank quick start guide f or models abbra home control abbra campus abbralink abbra home control quick start guide.
Warranty visonic ltd. And/or its subsidiaries and its affiliates ("the manufacturer") warrants its products hereinafter referred to as "the product" or "products" to be in conformance with its own plans and specifications and to be free of defects in materials and workmanship under normal use and se...
Perimeter zone: this type of zone setting is used be a sensor designed to detect entry into the premises from outside. Sensors that would fit this purpose would be sensors on exterior doors such as front, back or an interior garage door as well as windows. This sensor is not ignored when the abbra s...
Step 2 – activating the control panel the control panel comes with its wall mounting bracket already fixed in place. Leave in this position to complete the installation and registration. The wall mounting option is explained later in this guide. Find a central location to place the abbra control pan...
• go to www.Myabbra.Com and select the latchkey notification link. • enable this feature so you will be notified when the children arrive home. Select the people and methods you would like to abbra to notify. • now select the automation link • assign each of the automate fields the appropriate house...
Your system is activated in the away mode, an alert will be triggered and the siren will sound. You can change both these settings later if you desire. Quick and easy press and stick mount: you can install movement detectors either by fixing with adhesive tape or by screwing to the mounting surface....
5. Lights can turn on and off according to a predetermined schedule to make your home look occupied while away on vacation. 6. Turn lights on or off while away from your home using your cell phone. With the addition of x10 lamp modules, appliance modules, electrical outlets and light switches you wi...
Using the bracket as a guide, mark the mounting surface with the three drilling holes. The large circle in the bracket is for the tamper retainer washer which is a fourth hole that needs to be marked (using the tamper retainer washer will ensure that if there is an attempt to force your control pane...
