Abee M3 User Manual - page 17
15
M3/M5
Manual
In the menu screen, select Automatic Record, then select ON or Off.
13.
Record Interval: to set up the record interval
In menu screen, select Record Interval, then select 2min. or 3 min. or
5 min..
14.
Motion Detection: the device will start record 5-10 before motion is
detected until the motion is stop.
In menu screen, select Motion Detection, then select On or Off.
15.
Collision Detection: in recording mode, when accident or impact occurs
the device will automatically record with emergency record function.
The sensitivity of collision can be set.
In menu screen, select Collision Detection, then select High Sensitivity,
Medium Sensitivity, Low Sensitivity, or Off.
16.
Delay Shutdown: the device will still keep recording for a short footage
before shutdown
In menu screen, select Delay Shutdown, then select 10 sec., or Off.
17.
Speed Position Management: Add or delete speed position
In menu screen, select Speed Position Management, choosing Add
Speed Position or Delete Speed Position.
※ To proceed the “ add speed position” should be under GPS
positioning completed. It can be set up 200 groups as maximum.
※ The all saved data will be deleted when choosing “delete speed
position.”