Abee V11 User Manual - page 12
10
V11 Car Recorder Manual
v.
Menu function
In general mode, press the
key and choose
Menu,
to enter the menu screen.
1.
Time Setup
:
Set up the current time
In the menu screen: Select
Time Setup
.
Use
key to set up the date
and time then press
key to choose
OK
. After setup has been completed
it will automatically return to the previous screen.
2.
Time Stamp
:
to set up the recording date & time on video
In the menu screen, select
Time stamp
, then select On or Off.
3.
LCD Setting
:
to set up whether to turn on the screen while recording
In the menu screen, select
LCD Setting
, then select On , Off in 30 Seconds,
Off in 3 minutes or Off.
4.
Audio Recording: to set up whether to record sound in to video
In the menu screen, select
Audio Recording
,
then select
On or Off.
5.
Sound Effect: to set up whether to turn on the keypad tone
In the menu screen, select
Sound Effect, then select On or Off.
6.
Auto Recording: to set up auto turn-on and record when engine is started.
In the menu screen, select
Auto Recording, then select On or Off.
7.
Motion detects function, automatically record 5-10 seconds before the motion
is detected until the motion is stop.
In the menu screen, select Motion Detection, then select On or Off.
8.
Collision Detection: in recording mode, when accident or impact occurs the
device will automatically lock the current file. The sensitivity of collision can be
set
, collision information will be shown through ADR Player.
In the menu screen
, select Collision Detection, then select High Sensitivity、
Normal Sensitivity、Low Sensitivity or Off.
9.
Great night vision:In a low light environment, it can be converted to black and
white mode for sharpening the image
In the menu screen, select Night Vision, then select On or Off.
10.
Frequency Setting
:
to set the display frequency to avoid the images flashing
In the menu screen
, select Frequency, then select 50Hz or 60Hz.
E
nglis
h