Abi JY-130B User Manual - page 9
OPERATION PROCEDURES:
1.General:
1). Turn on the Power switch.
2). Place the target object on the base unit surface.
3). Adjust the image size according to the object size by pressing the ZOOM+/ ZOOM
-buttons on the control panel.
4). Press the “AF” button for automatic focus.
5).
“ Frz” button can be used to lock the image while changing displaying materials.
“FN” and “FRZ” button can be used to compare a previous captured image with the current image side by side.
Turn the knob on the camera head will changing the alignment of the showing image.
2. Showing printed material:
For sharper image and more vivid color, choose the Text mode by pressing “FN” and “P/N” button.
3. Showing the 3D objects:
Use the “FOCUS+/FOCUS
-” buttons on the front panel to adjust the focus on any part of the 3D object.
4. Showing the transparent material such as an overhead transparent sheet:
Press the “Lamp” button until the built-in base light lights up.
8.