Abilia Gewa Control Medi Multi Manual - page 43
43
2.14 Direct control
Your Control Medi can directly control a button with an external control switch. You can
choose which button that should be activated when you press the control switch.
It is also possible to direct control two buttons some seconds apart. The time can be from 2
to 8 seconds. (Direct Control of two buttons applies from ver. 1.0.6).
A control switch with 3.5mm plug will fit in to the side of your Control Medi.
Do as follows to activate/deactivate Direct control:
1. First press
and then simultaneously press
2
for 2 seconds. When you release the
buttons the
“Setting” alert sounds and the indication lamp on button 2 flashes.
2. Press
3
.
3a. Activate direct control.
Press
2
, and then press the button
X
that you want to be activated when pressing the
control switch.
or:
3b. Activate direct control of two buttons.
Press
3
, and then press the first button
X
that you want to be activated when pressing
the control switch. Press the second button
X
to be activated. Select time before the
second button should be activated with
1
-
4
.
or:
3c. Press
1
to turn off direct control, (Resetting scanning).
4. If th
e action is successful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Activating/deactivating Direct control
Activate direct control: Press
---
+
2
2 sec
,
3
,
2
, choose the button
X
.
Activate direct control of two buttons:
---
+
2
2 sec
,
3
,
3
,
choose the first button
X
,
choose the second button
X
. Select time
1
-
4
.
1
=
2 sec,
2
= 4 sec,
3
= 6 sec,
4
= 8 sec
Deactivate direct control: Press
---
+
2
2 sec
,
3
,
1
.
Default setting: OFF (none)
---