Abilia Gewa Control Medi Multi Manual - Scanning Control
44
3.
Scanning control
With Control Medi you can connect an external control switch
that starts a scanning function and thereby makes it possible
to control 28 different functions in its environment with i.e.
just a sip/puff switch. You can adjust various settings for the
scan, such as Scanning speed, Number of scanning
repetitions and Scanning start.
A control switch with 3.5mm plug will fit in to the side of your Control Medi Multi.
3.1 Setting the scanning start
With your Control Medi, you can choose to start the scanning from any button, regardless of
level. One advantage to starting the scanning at the
Level
-button is that you will be able to
get to a certain button more quickly. Do as follows to set the scanning start:
1. First press
and then simultaneously press
4
for 2 seconds. When you release the
button
s the “Setting” alert sounds and the indication lamp on button 1 flashes.
2. Press
3
.
3. Press the desired button
X
.
4.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Setting the scanning start
Press
---
+
4
2 sec
,
3
, then choose the button
X
.
Default setting: button 1
3.2 Setting the scanning speed
The scanning speed can be programmed from 0.1 to 5.0 seconds. It is set to 1.5 seconds
on default. Do as follows to program the scanning speed:
1. First press
and then simultaneously press
4
for 2 seconds. When you release the
button
s the “Setting” alert sounds and the indication lamp on button 1 flashes.
2. Press
1
.
3. Press
1
to lower or
2
to increase the scanning speed. The current speed is displayed
by the flashing indication light on button 1 or 2. Repeat pressing until the desired speed
is set. (Press
3
to see the speed.)
4. Press
for 2 seconds to save.
5.
If the action is successful, the “Success” alert sounds. If something goes wrong or takes
too long, the “Error” alert sounds.
Setting the scanning speed
Press
---
+
4
2 sec
,
1
,
press the desired setting, then
---
2 sec
1
= Lower
2
= Increase
Default setting: 1.5 seconds
---
---
---