AbiSee Eye-Pal ROL User Manual - page 21
Appendix B. Troubleshooting
Troubleshooting for power/battery/connections
•
If the ROL does not respond to any button, make sure the battery is
charged. If the battery is depleted, connect the power adaptor to charge the
battery. If the battery is fully charged, but the device stopped responding to
any Button, turn the device off, then on again.
•
If the adaptor does not power the ROL, check the connections. Make sure
the power adaptor is firmly connected to the ROL and to the power outlet. If
the adaptor still does not power the unit, contact Abisee or your ABiSee
distributor.
•
If the battery does not power the ROL, The battery may be depleted.
Connect the power adaptor to charge the battery.
Troubleshooting: Scan and Read Application
•
If the text you are reading does not make sense, do not stress Scan Button.
Press it and wait for the shutter sound. Make sure your reading language is
the same language as your document. Switch to/from tables reading mode.
•
If the text recognition takes unusually long before starting to read your
document, or it is not accurate, make sure your reading language is the same
language as your document. Place a document, leaving it still and making
sure there is nothing between the cameras and the document. Press Scan
Button just once, and wait for the shutter sound. Do not stress the Daisy keys
during the OCR process; wait until OCR is done before you navigate through
the text.
Troubleshooting the Calendar Application
•
If you do not hear the reminder after you finished your recording, increase
the volume – turn Volume Knob clockwise. Make sure that when you are
talking your face is close to the device.
•
If you think that you did not hear the reminder you have entered at the
right date/time, go to Main Menu and Select Calendar.Then use the Right
Roller to scroll to All Reminders and press the Action Button check if the
expected reminder exists. It is most likely that it has not been scheduled for
the time you tried to hear it.
21