Abit PD5NE Features - Installing The Mainboard
Installing the Mainboard
2-5
PN2 - Hardware Reset connectors
There is no specific orientation. Connect the two-thread hardware reset
cable to the PN2 connector pins on the mainboard.
Pin number
Name or significance of signal
1
Hardware reset signal
2
Ground
FAN1 - CPU Fan power connector
This has a specific orientation. Connect the three-threads CPU fan cable to the
FAN1 connector.
Pin number
Name of the signal or signification
1
Ground
2
+12V
3
Ground
IR - Infrared remote Connectors (JP10)
Watch the pin number and the orientation.
This has a specific orientation. Your mainboard supports this feature, but you
must buy the infrared remote device as an option.
Pin number
Name of the signal or signification
1
+5VDC
2
No connection
3
Receive data
4
Ground
5
Transmit data
ATXPWR - ATX Power input Connectors
These have a specific orientation. The three warning marks indicate that if you
make a mistake in pin number or connection orientation, you could destroy your
equipment. During installation, you just need to connect to the correct pins and