Abit PD5NE Features - 4-8
4-8
Chapter 4
2. Windows NT 3.5 & 3.51
2.1 Installation
(1) Select Control Panel from Main group.
(2) Select Display icon.
(3) Select Change Display Type from Display Settings.
(4) Select Change from Display Type.
(5) Select Other from Select Device.
(6) Place the Windows NT 3.51 Installation Disk (Diskette #1) into Floppy
Drive
(7) When the "Install from Disk" dialog box appears, type the directory
storing the drivers and click "OK".
The directory in Diskette #1 is at "A:\WINNT35".
The directory in CD-Title is at "D:\MM\WINNT\WINNT35".
(8) Select Install and click "Yes" when the "Installing Driver" dialog box
appears.
(9) Select New when the "Windows NT Setup" dialog box appears.
(10) Click "Continue".
A message will appear stating that the drivers were successfully installed.
Click "OK". You must now restart Windows NT 3.51.
2.2 Selecting resolution and color depth
(1) Select Control Panel from Main group.
(2) Select Display icon.
(3) Select Color Palette to change between 16 colors, 256 colors, 32768 colors,
65536 colors, and 16777216 colors.
(4) To select desktop resolution size, go to the Desktop area and use the slide
bar to change resolution from 640x480, 800x600, 1024x768, and
1280x1024.
(5) Select Test to test the resolution.
If the display test screen was good then select "Yes" when the "Testing
Mode" dialog box appears. If the display test screen was bad then select
"No". Windows NT will give you an error message.
(6) If the display test screen was good and you select "Yes", Windows
NT 3.51 will prompt you to restart Windows NT 3.51.