ABL eMH1 513 Instruction Manual - page 10
IntroductIon
2
(A)
(B)
(A) Read operating manual before opening
(B) Warning: dangerous electrical voltages
Consult the operating manual
(A)
(B)
(C)
(A) WARNING:
(B) Potential risk of electric shock from residual
direct currents
(C) For further information, see the operating
manual
DANGER!
•
The electrical system complies with all applicable guidelines and standards
•
Do not tamper with electrical installations
•
Do not modify the device in any way
•
Electrical connection should only be carried out by qualified personnel and in
accordance with the guidelines provided in this manual
•
Do not operate the device if wiring or connections are faulty
•
Do not carry out any repair work on the device while it is electrically live
•
Install all electrical connections properly
•
Make sure the device is properly connected to the electrical installation of the
building
WARNING!
•
The charging station is designed exclusively for connection and operation with a
230 V 50 Hz power supply
•
The supply lines may be laid either in a surface- or flush-mounted manner
•
It is recommended to feed in the cable at the bottom of the housing base
Read and take note of the safety instructions before assembling, starting up or opening
the charging station.