1. DL manuals
  2. ABLE
  3. Switch
  4. 6 Series
  5. Installation & Maintenance Instructions

ABLE 6 Series Installation & Maintenance Instructions

Summary of 6 Series

  • Page 1

    Installation & maintenance instructions 6 series pressure switch reading office cutbush park, danehill, lower earley, reading, berkshire. Rg6 4ut. Uk. Tel: +44 (0)118 9311188 email: info@able.Co.Uk aberdeen office unit 6 airside business park, kirkhill industrial estate, dyce, aberdeen. Ab21 0gt. Uk...

  • Page 2

    General before installing, check the sensor model selected for compatibility to the process media in contact with the sensor and wetted parts. J6 pressure switches are activated when a bellows or piston sensor responds to a pressure change. This response actuates a single snap-action switch, convert...

  • Page 3

    Part ii - adjustments tools needed models 126, 134, s126b, s134b: 3/16" & 1/4" open-end wrenches models 136-160, s136b, s160b, 680: 5/8" open-end wrench models 258-274, 354-364: 11/16" open-end wrench models 218-230: 1/4" open-end wrench models 610-614: 3/16" open-end wrench pressure models for set ...

  • Page 4

    Dimensions j6 series general purpose service; nema 4 dimension a models inches mm npt 126-160 5.06 128,5 1/4 s126b-s160b 5.40 139,7 1/2 218-230 4.31 109,5 1/4 258-274 4.75 120,7 1/4 354-364 4.80 121,9 1/4 610-614 5.70 144,8 1/4 680 4.95 125,7 1/4 im6-02.

  • Page 5

    Recommended practices and warnings united electric controls company recommends careful consideration of the following factors when specifying and installing ue pressure and temperature units. Before installing a unit, the installation and maintenance instructions provided with unit must be read and ...