Installation & maintenance instructions 6 series pressure switch reading office cutbush park, danehill, lower earley, reading, berkshire. Rg6 4ut. Uk. Tel: +44 (0)118 9311188 email: info@able.Co.Uk aberdeen office unit 6 airside business park, kirkhill industrial estate, dyce, aberdeen. Ab21 0gt. Uk...
General before installing, check the sensor model selected for compatibility to the process media in contact with the sensor and wetted parts. J6 pressure switches are activated when a bellows or piston sensor responds to a pressure change. This response actuates a single snap-action switch, convert...
Part ii - adjustments tools needed models 126, 134, s126b, s134b: 3/16" & 1/4" open-end wrenches models 136-160, s136b, s160b, 680: 5/8" open-end wrench models 258-274, 354-364: 11/16" open-end wrench models 218-230: 1/4" open-end wrench models 610-614: 3/16" open-end wrench pressure models for set ...
Dimensions j6 series general purpose service; nema 4 dimension a models inches mm npt 126-160 5.06 128,5 1/4 s126b-s160b 5.40 139,7 1/2 218-230 4.31 109,5 1/4 258-274 4.75 120,7 1/4 354-364 4.80 121,9 1/4 610-614 5.70 144,8 1/4 680 4.95 125,7 1/4 im6-02.
Recommended practices and warnings united electric controls company recommends careful consideration of the following factors when specifying and installing ue pressure and temperature units. Before installing a unit, the installation and maintenance instructions provided with unit must be read and ...