ABLE Kamstrup 382M Installation & Maintenance Instructions - Installation Manual
3
55121131_B1_GB_10.2013
Installation manual
The phase indications have various functions. They indicate the two situations described below.
From the connection of the meter:
Indications L1, L2, L3
Indicate
On
Voltage is above minimum limit (160V)
Off
Voltage is below minimum limit (160V)
Indications
Indicate
On
The load is above the minimum (2.3W)
Off
The load is below minimum limit (2.3W)
If the load exceeds the minimum limit and the meter is configured with this reading,
consumption will be indicated via the quadrant reading. The direction of the three phase
currents is indicated via the arrows above, respectively L1, L2 and L3.
7-digit identification field
Quadrant indicator
Module indication
Text field
Unit field
Breaker symbol
Tamper symbol
Tariff indication
Radio network symbol
Error symbol
Phase sequence indication
9-digit value field
Phase current indication
Prepayment-symbol
Supply voltage indication
For future use
For future use
For future use
For future use
For future use
Terminals
Multi core 7 core
Massive / terminals
35 mm
2
≥ 6 mm
2
≥ 6 mm
2
≥ 2.5 mm
2
Screw: Pz 2 or straight slot
Torch:
2.5 – 3 Nm
Load control, installation
For meters with load control relay(s). Due to the delay in the meter, it is important to restart the
meter (off/on) when the time is set correctly in the meter. This places the relays in the correct
position and stops the delay timer.