ABLE Kamstrup 382M Installation & Maintenance Instructions - Installation Manual
4
55121131_B1_GB_10.2013
Installation manual
With built-in radio
If the meter is supplied with integral radio for establishment of remote reading, the meter
automatically connects to a radio network. The integral radio is equipped with an internal
antenna. The radio signal strength can be read by means of a hand-held terminal. If the
radio signal is not sufficient, an external antenna must be connected. Please see current
documentation on available antennas.
Mounting a communication module in the meter may influence on radio communication, please
contact Kamstrup.
With disconnection function
With this type of meter, it must be checked that the red diode is not switched on. This indicates
that the consumer’s supply is switched off.
Installation dimensions
171.7
269.2
80.3
Connection diagrams
The valid connection diagram appears from the type label.
1 2 3 4 5 6 7 8 9 10 11 12
L1
L2
L3
N
S0 +
20
-
21
P+
1 2 3 4 5 6 7 8 9 10 11 12
L1
L2
L3
N
S0 +
20
-
21
P+