Ableconn USB2E100W Quick Installation Manual - page 3
3. Please click on Continue to go to the next step once the screen
is prompted up.
4. Please see Install AX88772 Ethernet Adapter Drivers screen to
click on Install for the installation.
5. Make sure that you want to install this driver now and the computer
will be restarted once the installation is done. Please click on
Continue Installation to continue the installation.
6. After finish the installation process, you will see The installation was
successful screen and please click Restart for the device using.
7. Once computer restart is completed, you can connect the adapter to a
network device by an Ethernet cable.
Verifying the Driver
For Windows
®
XP/ Windows
®
Vista / Windows
®
7 / Windows
®
8 users
To verify the driver of the Ethernet adapter, follow the step below to
open the Device Manager on Windows
®
1. Following the path as below to open the device manager
Windows
®
8 / 10: Press WIN
and X keys together and select
Device Manager
Windows
®
Vista / 7: In the Start menu Search box, type device
manager and then press enter
Windows
®
XP: Right-click My Computer on the desktop and click
Properties>Hardware>Device Manager
2. In the Network adapters group, an item named “ASIX
AX88772C USB2.0 to Fast Ethernet Adapter” should be listed.
For MAC OS
®
10.x users
Once you finish the installation of Ethernet Adapter, please navigate to
About This Mac>System Profiler>Hardware>USB, then you will find
the driver of AX88772C.
3