Ablerex BRIC30N User Manual - page 19
36
7.
Troubleshooting
In the event of failure, the display area on the front panel will highlight the
problem area in red. The "Alarm" light in the lower right corner will also blink to
warn that there is a problem with the UPS. For more information about the current
error status, please refer to sections 5.1.1. and 5.1.9.
We recommend checking the error code using the following method when
troubleshooting:
At the panel, click on Main→Monitor→Maintenance Code to bring up the
screen shown below. If you can provide the maintenance code to the
technician from us or the authorized distributor, this will speed up
troubleshooting.
37
8.
Maintenance
8.1.
Regular Maintenance
To prevent unexpected machine outages, we recommend arranging for an
authorized Ablerex distributor to conduct annual maintenance to the electrical and
mechanical components. Our technicians may advise you to replace certain parts
as necessary.
8.2.
Battery
The condition of the battery is one of the most important factors in UPS
operation. Battery life depends on the external operating environment and usage.
Apart from placing the UPS in a suitable environment, if the battery is not used for
extended periods of time then we recommend executing the battery test mode
every 2 ~ 3 months to check the battery health.
8.3.
Fan
The fan is used to keep the system cool and its service life depends on the
ambient temperature and amount of dust in the air. We recommend replacing the
fan regularly as recommended by the technician.
8.4.
Capacitor
Capacitor life depends on usage and environment. The technician may
recommend replacements based on the condition of each component during
routine maintenance.
8.5.
Fuse
The BRIC30S/BRIC30N contains three sets of fuses, one for Input, one for
Output and one for Battery Output. If you need to replace a fuse do not use a
higher fuse rating. Apart from ensuring that all fuses are from the same
manufacturer and have the same specifications, you should also make sure the
replacement fuses match the following specifications: