Abode IP Streaming Camera User Manual - page 3
When pairing the streaming camera with the abode gateway, we recommend using the abode mobile
app, or web app. They both use similar screens for this process.
Below are screenshots from the mobile app during the pairing process.
Log-into the app, click on the settings button located on the bottom right of the screen, click on Add a
New device. Select Streaming Camera, and follow the instructions on each screen.
Pairing and installing the streaming camera
3
The Activation code is located
on user guide that comes with
the camera
Name the camera
Cloud storage for video
clips can be changed,
based on service plan.
Once you have setup the Wi-Fi router settings and
completed the naming of the streaming camera, un-plug
the power and ethernet cables from the camera and
relocate the camera to the desired location and power up
the camera using its transformer.
Allow a full 1 or 2 minutes for the camera to boot-up and
connect to your Wi-Fi router.