ABTronic 2X Instructions Manual - Taking Care of Your Unit
30
exercise to increase circulation, exercise and exhaust muscle for
complete relaxation to provide relief of these symptoms. According to
your comfort use either Mode 2, 4 or 8 with medium to low intensity
levels to melt away tension and enjoy a deep relaxing personal
massage with your AbTronicX2 System, whenever you wish. Unlike
regular massagers that merely vibrate and are quite noisy, the
AbTronicX2 is absolutely quiet and your own muscles provide the
massage, stimulating increased blood flow in the area resulting in a
natural pleasant warmth and deep relaxation.
TAKING CARE OF YOUR UNIT
The AbTronicX2 dual channel belt is made of quality materials.
The only maintenance required with the AbTronicX2 is to clean the
conductive pads gently from time to time with
a wet cloth, soapy
water
and to replace the battery.Do NOT immerse the belt in water or
other liquids.Do not rub hard on the conductive areas. Do not wash
the belt in the washing machine or apply fabric conditioner.
NEVER BEND the conductive pads! A discoloration of the
conductive area and a “crumbled look” after many uses however is
normal. The conductive pads are a consumable item and can wear
with use, depending on the gel you are using, your own body fluids and
how often you use the belt. Worn conductive pads can reduce the
performance of the unit or cause the belt to feel erratic. Wear and
tear is not covered by the guarantee, (for spares see Appendix). It
should be noted however that this is the most advanced 4
th
generation
design of a belt that lasts much longer than comparable “stick on” gel
pads used in other units. If several people want to share the
AbTronicX2 you can easily detach the computer unit by unsnapping it
from the neoprene center and use it on your own personal belt for
hygienic reasons. Just pull the unit off and put it on a new belt. The
AbTronicX2 is extremely energy efficient. The Batteries lasts for
approx. 100 sessions of ten minutes. If the output becomes weak or
the unit switches off automatically in less than 10 minutes, it is time to
change the batteries (even if the LCD is still lit up).
The electronic computer unit is built very reliable and uses SMT
technology. It is maintenance free and will give you many, many years
of trouble free usage.