1 i n s t a l l a t i o n i n s t r u c t i o n s radio alarm panel secvest 868 installation instructions perfect security for home and office these installation instructions are an important product accessory. They contain important installation and operation information. Bear this in mind if you p...
2 0. Introduction dear customer, thank you for purchasing the secvest 868 radio alarm station. You made the right decision in choosing this state-of-the-art technology, which complies with the current standards of domestic and european regulations. The ce has been proven and all related certificatio...
3 2. Contents 0. Introduction ................................................................................................. 2 1. Usage in accordance with regulations ..................................................... 2 2. Contents .................................................................
4 10.9.2. Connection type ........................................................................ 55 10.9.3. Ring to answer........................................................................... 55 10.9.4. Answer on 1 ring ...........................................................................
5 3. Precautions ! Warning ! To avoid fire and injury, please observe the following: • securely fasten the device at a dry location in the building. • ensure sufficient air circulation for the alarm station. • do not expose the panel to temperatures less than 0°c or more than 50°c. • the panel is de...
6 4. Scope of delivery and accessories required scope of delivery burglar alarm station installation instructions operating instructions installation dvd downloader cd you also need: alarm detector signal transmitter optionally available: info module wireless control panel secvest key remote control...
7 5. Notes on connection and extension options the radio alarm panel is the basic device of an electronic security system for protecting your property (e.G.: apartment, house, garage, shops, etc.). In combination with other components such as radio detectors and signal transmitters, it secures the a...
8 6. Notes on security system 6.1 opening the panel casing install the alarm panel in the order described here. First remove the two screws on the base of the radio alarm panel as shown here. Open up the top part (1) of the radio alarm panel and separate the base plate (2) from the rest of the stati...
9 6.3 connections in the base plate the following figure shows the connections in the panel base plate. Number description 1 cable clamp for the 230v ac mains lead 2 connector for connection cable 3 230v ac mains connection 4 connector clamps for wired zones and outputs 6.4 blanking off non-used cab...
10 6.6 connecting the panel to 230v mains voltage connecting the panel to the 230v ac mains network is subject to national regulations. Check that no voltage is present in the connection cable when fitting. Connect the 230v mains supply to the mains connector as shown in the diagram and do not forge...
11 6.8 connecting the analogue telephone (optional) see appendix b for instructions on connecting isdn and gsm equipment. Connect the analogue telephone as shown in the diagram: a-b connector of external analogue line in uk only a1-b1 connector for analogue terminal devices e.G. Telephone/fax 6.9 co...
12 6.12 closing the alarm panel reconnect the upper part to the base plate. Do not forget to fit the connection cable between the base plate and the alarm station. At the same time, check that all other connections (emergency power supply and loudspeaker) are correctly connected to the upper part. N...
13 6.15. Codereset if the installer and/or administrator code gets lost, it is possible to execute a code reset. In this way all user settings (also programmed telecommands) will be deleted and the factory defaults for installer and user codes are reset. All programmed settings in the installer menu...
14 fire this zone always triggers an alarm, irrespective of whether the burglar alarm panel is activated or deactivated. The alarm tone is affected via the buzzer in the radio alarm panel and the external siren as a pulsed alarm tone. Teach only fire detectors for this zone. Pa (panic) this zone alw...
15 system set when the radio alarm panel is active, it monitors all zones for changes to the line voltage and triggers a local alarm and optionally an external alarm. System unset when the radio alarm panel is inactive, it monitors only zones that are always active, such as 24-hour zones, technical ...
16 8. Overview of alarm panel and keypad read area of chip key graphic display multiline display button for activating radio alarm station keypad for programming and operating the station keypad cover integrated siren and loudspeaker button for deactivating radio alarm station control buttons keypad...
17 9. Installer mode there are two ways of programming the radio alarm station: a: via the keypad on the radio alarm station. B: via the software either locally or via the communications software. The following describes how to program the radio alarm panel via the keypad. To program the radio alarm...
18 confirm the display leave installer mode by pressing the control button under the word yes. The radio alarm panel changes to user mode and displays the following text: “you have left installer mode.” 10.2 list of menu items in the installer menu in installer mode, you can teach radio detectors, c...
19 10.3 configuring zones and teaching radio detectors if you are in user mode, you first have to change to installer mode. Proceed as follows: enter a valid installer code (factory setting 7890): 7 8 9 0 you may also have to enter the master code (factory setting 1234). The radio alarm panel change...
20 to see the attributes of another zone, use the control buttons to switch between zones. To edit the selected zone, select edit by pressing the control button under the word edit. To cancel input, press the control button under the word back. If you confirm edit with the edit button, you see the f...
21 note: if you press delete until the current name has disappeared from the display, and then press delete once more, the display leaves the name change screen and restores the name of the zone to its previous value. 10.3.2 selecting zone type after entering the zone name, use the control buttons t...
22 10.3.3 selecting partitions after entering the zone type, use the control buttons to select partitions. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm partitions with the select button, you...
23 note: the attribute soak test is only to be used if a detector is likely to create false alarm. This function works automatically. To test the range of a detector you need to use the walk test function and do not activate the soak test. The soak test function disables the walk test function as th...
24 function meaning auto learn if you select this item, you can walk through your premises and activate the detectors one after the other (by triggering the tamper contacts). The detectors send a learn message and the panel now automatically stores the book-in messages in sequence according to the z...
25 if instead of the above display you see the following: this detector has already been trained for another zone. Conduct a walk test to find out which zone this detector has been trained for. Important: it may happen that you see this display after teaching the detector for the first time and afte...
26 10.4 configuring outputs in the installer menu, use the control buttons to select the second menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: press the control button to select edit...
27 10.4.2 defining output name select name with select and you see the following graphic display: the cursor flashes at the last character. Use the control key to move the cursor to the left or the right. To delete a letter, press the control button under the word delete. To save your input, press t...
28 function meaning not used this output is not in use and is never activated. (exception: complete power loss) siren this output is activated on local alarms for the defined siren duration. E/e follow this output is activated for the duration of the delay time (entry/exit delay active). Armed lamp ...
29 important: do not add outputs if you use the wam (wireless accessory module) as output module, since this reserved the outputs automatically. For more information, see the section wam (wireless accessory module) in these instructions. Note: if you select the output type user defined, you can now ...
30 you see the following graphic display: if the wam is in learn mode, activate the sending of a message by pressing the control button under the word send. To cancel input, press the control button under the word back. After activating send mode, you receive the following graphic display: if the re...
31 10.5 other devices in the installer menu, use the control buttons to select the third menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: use the control buttons to select a function. ...
32 after selecting edit ext siren, you see the following graphic display: use the control buttons to select a partition. Change the setting by pressing the control button under the word change. To end input, press the control button under the word done. If you want the siren to be activated when the...
33 after activating send mode, you receive the following graphic display: if the receiver beeped twice, the learn message was correctly received. End the teach process by pressing the control button under the word yes. To cancel input, press the control button under the word no. The learn procedure ...
34 if you want to have the ready to set indication use the control buttons to select the option enable. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. To deactivate the indication use the control buttons to ...
35 if you wish to remove a wam from service in the system, then: 1. Select other devices – wam – add/del wam. The display shows a list of the available wams. 2. Select the wam you wish to delete. (when a slot is occupied with a wam the then line shows a icon.) the display asks you to confirm your ch...
36 10.5.3.3 wam as transmitter/receiver technology module analogue to the wam as output module, the wam as transmitter/receiver technology module configures the 4 outputs. In addition to the outputs, two radio inputs are reserved. These have to be configured according to the function as connected in...
37 10.5.4.1 editing arming station if you confirm edit arming station with select, you see the following graphic display: press the control button to select the respective function and confirm by pressing the control button under the word select. To cancel input, press the control button under the w...
38 10.6 configuring partitions in the installer menu, use the control buttons to select the third menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: select the first partition (partition...
39 10.6.1 configuring exit mode of partition after entering the partition name, use the control buttons to select type. Confirm by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm type with the select button, you see the...
40 10.6.2 configuring exit delay of partition after entering the exit mode for the partition, you have to enter the delay time for the following cases: exit mode = timed set or exit mode = silent set press the control button to select exit time. Confirm by pressing the control button under the word ...
41 10.6.5. Configuring exit mode on internal activation of partition each partition can also be individually internally activated. This means that you can remain in the building without losing all-round protection. With internal activation, some detectors are not monitored – e.G., motion sensors. Yo...
42 10.7. Configuring system options in the installer menu, use the control buttons to select the fourth menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: use the control buttons to sele...
43 10.7.1. Configuring user options press the control button to select user options and confirm by pressing the control button under the word select. To cancel input, press the control button under the word back. After selecting user options with select, you see the following graphic display: with t...
44 10.7.2. Remote access this menu controls access to the remote control feature. This feature allows a remote operator to issue commands to the radio alarm panel by pressing the buttons on a telephone keypad. The commands available are: to: key-in unset the system #0*0 set the system #0*1 part set ...
45 10.7.4. Factory settings use the control buttons to select restore defaults. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm restore defaults with the select button, you see the following gr...
46 10.7.6. Entry timer on unset use the control buttons to select entry timer on unset. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm entry timer on unset with the select button, you see the ...
47 10.7.8. System auto rearm use the control buttons to select system auto rearm. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm system auto rearm with the select button, you see the following...
48 10.7.10. Siren time use the control buttons to select siren time. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm siren time with the select button, you see the following graphic display: us...
49 10.7.12. Supervision fail response use the control buttons to select supervision. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm supervision with the select button, you see the following gr...
50 10.7.13. Jamming detection use the control buttons to select jamming detection. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm jamming detection with the select button, you see the followin...
51 10.7.15. Siren in part set use the control buttons to select siren in pset. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm siren in part set with the select button, you see the following gr...
52 10.7.17. Rf siren options this menu allows you to select how the radio siren responds during fire, burglar or pa alarms. There are two options: siren + strobe the radio siren operates both siren and strobe in an alarm. Strobe the radio siren operates the strobe only in an alarm. 10.8. Ip network ...
53 if you have fitted an gprs module then this menu allows you to give the radio alarm panel its own ip (internet protocol) address, ready for use with ip alarm reporting or ip downloading. Before programming radio alarm panel please make sure that you have obtained the necessary information from yo...
54 function meaning account name the account name is defined by the download software to guarantee a secure connection. The account name is displayed when it is entered. Connection type defines whether the connection is direct via usb cable or telephone. Ring to answer if the analogue line is not us...
55 10.9.2. Connection type use the control buttons to select connection type. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm connection type with the select button, you see the following graph...
56 10.9.4. Answer on 1 ring use the control buttons to select answer on 1 ring. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm answer on 1 ring with the select button, you see the following gr...
57 function meaning call out only the panel cannot be call from outside for remote maintenance. A call to the pc of remote maintenance must be made manually via the user menu. Secure callback the remote maintenance call is started from the panel by the pc of remote maintenance. The panel telephone n...
58 10.9.7. Ip network if you have fitted an ethernet module to the radio alarm panel, then it is possible for downloader to communicate with the radio alarm panel using the internet protocol. This menu allows you to store two ip addresses that the radio alarm panel can “call” in order to start a dow...
59 10.9.9. Modem baud rate press the control button to select modem baud rate and confirm by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm modem baud rate with the select button, you see the following graphic display:...
60 function meaning alarms settings for alarm reporting (awug)??? Social care settings for reporting a social care emergency call speech dialler settings for reporting voice messages (speech dialler) sms settings for reporting transmitting text messages (sms) line fail reporting settings for reporti...
61 function meaning call mode setting for reporting alarm messages primary telecoms you must use this option to select which route the radio alarm panel will pick first for sending reports. Phone book select a phone number for transmitting alarm messages. Ip network account numbers for entering the ...
62 10.10.1.2. Primary telecoms press the control button to select primary telecoms and confirm by pressing the control button under the word select. To cancel input, press the control button under the word back. After selecting primary telecoms with select, you see the following graphic display: use...
63 10.10.1.4. Ip network if you have fitted an ethernet/gprs module then the radio alarm panel can report alarm events over the internet to a suitable receiver. There are two types of receiver: an iris polling engine, or a specialised application running on an arc’s pcs. You must store separate ip a...
64 10.10.1.6 report type use the control buttons to select report type. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm report type with the select button, you see the following graphic display...
65 medical open (see note 1) close (see note 1) zone omitted (channel 5. See note 2) burg partition 1 burg partition 2 burg partition 3 burg partition 4 alarm confirmation (required for dd243) alarm abort notes:1. Open and close provide the same functions as open/close, but on two separate channels....
66 10.10.1.9. Sia report use the control buttons to select sia report. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm sia report with the select button, you see the following graphic display: ...
67 ac lost - - - at ac restore - - - ar reset - or or or low batt - - - yt low batt restore - - - yr batt missing - - - ym batt missing restore - - - yr plugon fault - - - lt plugon fault restore - - - lr pstn fault - - - lt pstn fault restore - - - lr jamming - - xq xq supervision fault - - bz bz s...
68 10.10.1.10. Sia report restorials use the control buttons to select sia restorials. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm sia report restorials with the select button, you see the ...
69 message cid basic cid basic + restore code + zn no. + user code + zn no. + user keypad medical 100 100 fire 110 110 keypad fire 110 110 keypad fire restore - 110 fire restore - 110 panic 120 120 keypad panic 120 120 keypad panic restore - 120 panic restore - 120 burg 130 130 burg restore - 130 li...
70 10.10.1.12. Force test call now use this option to make the radio alarm panel start a test call immediately. Use the control buttons to select force test call now. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word...
71 10.10.1.14 static test call in static testing the system makes a test call either at one particular time of day or on one day every month. To make test calls at a set time every day select reporting, alarms, static test call, daily. From the display select a number between 01 and 24 to choose the...
72 10.10.1.16. Send tamper as burg use the control buttons to select send tamper as burg. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm send tamper as burg with the select button, you see the...
73 use the control buttons to select a function. For a list of functions and their attributes, see the table below. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. Function meaning call mode setting for repor...
74 10.10.2.2. Primary telecoms press the control button to select primary telecoms and confirm by pressing the control button under the word select. To cancel input, press the control button under the word back. After selecting primary telecoms with select, you see the following graphic display: use...
75 10.10.2.4. Account numbers use the control buttons to select account numbers. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm account numbers with the select button, you see the following gr...
76 the report sequence is as follows: 1. The radio alarm panel reports to the social care station if social care reporting call mode is on. The report includes a scancom channel 8 to show that a two way speech path is available. The radio alarm panel opens a two-way speech channel at the end of the ...
77 10.10.3. Configuring speech dialler the speech dialler function of the alarm panel describes the option of sending a voice message to a (mobile) telephone in addition to the digital transmission of a report to a command centre in the event of an alarm. The radio alarm panel has a built-in speech ...
78 10.10.3.1. Call mode this option enables or disables the speech dialler feature. To employ speech dialling set the call mode to “enabled”. 10.10.3.2. Primary telecoms press the control button to select primary telecoms and confirm by pressing the control button under the word select. To cancel in...
79 10.10.3.4. Phone book enter the phone numbers to be dialled. You assign phone numbers to messages under the destinations menu item. To enter a dial break press the “*”-button. Each break holds back the dialing process for three seconds. The display then gives you a chance to key in a name for tha...
80 10.10.3.6. Destinations use the control buttons to select destinations. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm destinations with the select button, you see the following graphic dis...
81 note that after receiving a dtmf ‘5’ the radio alarm panel will go on to call any other programmed speech dialler numbers. To prevent calls to other programmed speech dialler numbers the called party can acknowledge a call by sending back a dtmf ‘9’. When the radio alarm panel receives the ‘9’ it...
82 function meaning call mode setting for transmitting text messages (sms) primary telecoms you must use this option to select which route the radio alarm panel will pick first for sending reports. Messages enter the text message via the keypad. Phone book for entering phone numbers to which sms mes...
83 10.10.4.3. Messages use the control buttons to select messages. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm messages with the select button, you see the following graphic display: use th...
84 the control button under the word select. To cancel input, press the control button under the word back. Report triggers meaning tampers transmits an sms in the event of a tamper alarm. Alarms transmits an sms in the event of an alarm (fire, panic, etc.). Sets/unsets transmits an sms when the ala...
85 10.10.5. Line fail reporting this menu lets you program the system to respond with either audible or silent alarms when the radio alarm panel detects a fault on one of its communication lines. Use the control buttons to select line fail reporting. Confirm your selection by pressing the control bu...
86 10.11. Configuring social care in the installer menu, use the control buttons to select the seventh menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: use the control buttons to selec...
87 10.11.2. Monitoring interval use the control buttons to select monitoring interval. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm start monitoring interval with the select button, you see ...
88 10.12. Test function in the installer menu, use the control buttons to select the eighth menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. You see the following graphic display: use the control buttons to select a functio...
89 10.12.1. Testing local siren use the control buttons to select siren. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm siren with the select button, you see the following graphic display: act...
90 10.12.3. Testing the keypad use the control buttons to select keypad. Confirm your selection by pressing the control button under the word select. To cancel input, press the control button under the word back. If you confirm keypad with the select button, you see the following graphic display: pr...
91 10.12.5. Detector signal strength make the detector signal strength test in the same way as the walk test. The signal strength displayed corresponds to the reception strength of the last received signal of this detector. For the test, the reception strength of the alarm panel is reduced by 6db. T...
92 10.13. View log in the installer menu, use the control buttons to select the ninth menu item. You see the following graphic display: select this menu item by pressing the control button under the word select. The following table shows the messages: 10.14. Displaying system information in the inst...
93 11. Isdn/gsm/ethernet/gprs module 11.1 preparing the alarm station before connecting the module to the alarm station, disconnect the electric power supply. First set the alarm station to installer mode to prevent triggering a tamper alarm when removing the upper section from the base plate. Now l...
94 11.2 fitting the isdn module now insert the isdn module carefully and exactly into the base for the isdn module. Make sure that all base feet are correctly anchored in the base holder. Note: the isdn module does not support msn numbers. Plug in the isdn cable. Now read section 11.6 on the next pa...
95 11.4 fitting the ethernet module now insert the ethernet module carefully and exactly into the base for the module. Make sure that all base feet are correctly anchored in the base holder. Plug in the ethernet cable. Now read section 11.6 on the next page. 11.5. Fitting the gprs module before inse...
96 11.6 concluding work finally, plug the siren plug from the cover of the upper section into the pcb and replace the tamper contact spring. Make sure that the microphone is also exactly located in the upper section and place the cover back on the upper section. Screw the upper section back in place...
97 now connect the other end of the usb cable to your pc or laptop. In the installer menu. Go to “download” and in the “download” menu select “connection type”. Select “local” and press the control key under “select”. During the first call, the alarm station then installs the usb drivers on your com...
98 13. Technical data voltage supply the internal power supply meets the requirements of en50131-6 type a, class 2 and environment class 2. Mains supply voltage 230v ac, 50hz +/- 5% power consumption: 200ma +10%/-15% emergency power supply: 6 x 1.2v, nimh, 2000mah standby time: 12h charging time: le...
99 communication this product meets the requirements of en50136-1-1:1998. This product can share a pstn line with other telephony or fax equipment. Pstn: scancom fast format, sia i, sia ii, sia iii, extended sia level iii, contact id, cid in sms gsm/isdn/ethernet/gprs: plug-in extension module. Uses...
100 14. Declaration of confirmity see next pages 15. Glossary abbreviation explanation arc alarm receiving centre gprs general packet radio service gprs apn access point name gsm global system for mobile communications (groupe spéciale mobile) the mobile phone standard used throughout europe and man...
Secvest 868 installer mode scheme detect ors in stal ler mo d e (1) outputs in stal ler mo d e (1) ot her dev ices in stal ler mo d e (1) pa rti tions in stal ler mo d e (1) sy ste m options in stal ler mo d e (2) ip netw ork in stal ler mo d e (2) dow nloa ding in stal ler mo d e (2) repor ting ins...
Secvest 868 in stal ler m ode (1 ) d et ect o rs a d d /d el d et ect o rs a u to l earn 10.3. 5.1. D el et e a ll 10.3. 5.2. Zone 0 1 10.3. 5.3. ... Zone 3 2 10.3. 5. E di t zone s n a me 10.3. 1. Ty pe n o t u sed no rm al al arm e ntry route f in a l e x it 2 4 hour fi re pa t ech n ical a larm k...
Secv est 868 in st al ler m o d e ( 2) system opt ions u ser a ccess record m em o r eset a ft er a lar m dual key funct ion z one t am per reset om it a ll so ci al c ar e key q ui ck set 10. 7. 1. R em ot e a ccess cal l- out cont rol cal l- in cont rol 10. 7. 2. Language en g lis h d eut sch fr a...
S ecvest 868 in stal ler mode r epor ti n g alarm s call mode disable d single alte rnate 10.10.1.1. Prim ary te le com s pstn plug-on 10.10.1.2. Phone book te l no nam e > te l no nam e > 10.10.1.3. Ip ne tw ork unit nam e polling ip addre ss arc ip addre ss 10.10.1.4. Account num be rs account no ...
W ir / w e s e cu ri ty -c e n te r g m b h & c o .K g a b u s g ro u p l in k e r k re u th w e g 5 d -8 6 4 4 4 a ff in g / o t m ü h lh a u se n e rk lä re n h ie rm it , d a s s d a s p ro d u k t / h e re w it h d e c la re s t h a t th e p ro d u c t t y p / t y p e : f u n k a la rm ze n tr a...