Abus TVCC74000 User Manual

Other manuals for TVCC74000: User Manual
Manual is about: Day/Night Vario Outdoor Camera

Summary of TVCC74000

  • Page 1

    19 day/night vario outdoor camera version 03/2011 original english user manual. Keep for future use. Tvcc74000 tvcc74010 tvcc74011 tvcc74020 tvcc74021.

  • Page 2

    20 uk introduction dear customer, thank you for purchasing this product. This product meets the requirements of the applicable european and national guidelines. The corresponding declarations and documents can be obtained from the manufacturer (www.Abus-sc.Com). To maintain this condition and to ens...

  • Page 3

    21 important safety instructions the warranty will expire for damage due to non-compliance with these operating instructions. We shall not be liable for any consequential loss! We do not accept liability for damage to property or personal injury caused by incorrect handling or non-compliance with th...

  • Page 4

    22 table of contents 1. Intended use .......................................................................................................................... 23 2. Explanation of symbols ....................................................................................................... 23 3. S...

  • Page 5

    23 1. Intended use the day/night vario ball type dome camera is equipped with a high quality image sensor. It is used for video surveillance in connection with a recorder or monitor. You can find a detailed description of functions in section “4. Features and functions”. Any other use than that desc...

  • Page 6

    24 5. Device description 5.1 overview – type numbers artikelnummer tvcc74000 tvcc74010 tvcc74020 tv-lines 540 540 540 dnr - wdr - - 120 db (max.) ir power source 12vdc 12vdc 12vdc artikelnummer tvcc74011 tvcc74021 tv-lines 650 690 dnr wdr 46 db (max.) 120 db (max.) ir power source 12vdc 12vdc 5.2 un...

  • Page 7

    25 7. Camera description (1) base plate (2) lens window (3) infrared leds (4) focus adjustment (5) zoom adjustment (6) camera housing (7) camera cover (8) fixing screw for camera cover 8. Camera installation 8.1 cable routing attention! During the assembly the camera must be separated from the mains...

  • Page 8

    26 8.2 mounting of the video cable to connect the video signal of the camera with a monitor or recorder, use a coaxial cable of the type rg59 with bnc-connector (male) at the “video-out” connector. The cable length up to the next device should not rise 100 meters. 8.3 camera mounting 1. Please loose...

  • Page 9

    27 3. Please fix the base plate and the mounting plate at the mounting position, using the supplied pegs and screws. 4. Put the cover back on the camera and fix the cover by screwing the fixing screws..

  • Page 10

    28 8.4 camera adjustment to adjust the viewing angle of the camera please loose the fixing screws first using the hexagon wrench. After angle adjustment please fix the screws. 8.5 focus and zoom adjustment please use the supplied tool to adjust focus and zoom. Zoom: focus:.

  • Page 11

    29 9. Servicing and cleaning 9.1 function test check the technical safety of the product such as damage to the housing at regular intervals. When it can be assumed that the safe operation is no longer possible, the product must be put out of service and precautions taken o ensure that it is not used...

  • Page 12

    30 11. Technical data article number tvcc74000 tvcc74010 tvcc74020 standard pal resolution 540 tvl 540 tvl 540 tvl image sensor 1/3“ sony super had ii tm ccd 1/3‘‘ pixim dps cmos picture elements (total) 795(h) x 596(v) pixel 410.000 picture elements (effective) 752(h) x 582(v) pixel 390.000 signal-...

  • Page 13

    31 article number tvcc74011 tvcc74021 standard pal resolution 650 tvl 690 tvl image sensor 1/3“ sony exview had ii tm ccd 1/3‘‘ pixim dps cmos picture elements (total) 1020(h) x 596(v) pixel 768(h) x 548(v) pixel picture elements (effective) 976(h) x 582(v) pixel 758(h) x 540(v) pixel signal-to-nois...

  • Page 14

    32.