Acapella Violon 2001 Instruction Manual - Placement
Placement
Because of his built-in Class-A amplifier and is valve oscillator, the
ion tweeter requires sufficient ventilation. When used together with the
VIOLON 2001, minimum clearances have constructionally been taken into
consideration. Should you have purchased the ion tweeter for use with
other loudspeakers, be sure to allow the following minimum clearances.
Damage to the unit due to overheating will void the warranty.
During installation in a cabinet, the above mentioned minimum clearances
must be observed. Be sure to allow perfect heat dissipation through vertical
air circulation. Besides, the rear side of the cabinet must have an air
inlet corresponding to the width of the tweeter. No objects which could
hinder free air circulation should be fitted above the ion tweeter. As a
free-standing unit, a 10 mm clearance between the bottom panel of the unit
and the base will be sufficient.