Aec-6293m 1-ch esata/ 1-ch sata/ 1-ch ide adapter user's manual version: 1.1 copyright©2008 acard technology corp. Release: march 2008.
Copyright and trademarks the information of the products in this manual is subject to change without prior notice and does not represent a commitment on the part of the vendor, who assumes no liability or responsibility for any errors that appear in this manual. Acard is the trademark of acard techn...
Table of contents chapter 1 introduction ............................................................... 1.1 overview ............................................................................ 1.2 features ............................................................................ 1.3 specificati...
Weee statement in order to cope with the increasing waste electrical and electronic equipment, reduce the use of landfill and incinerator, and prevent the harmful matter of waste equipment from entering the environment, the european union (eu) has set the directive on waste electrical and electronic...
Weee бюлетень ЧтобЫ сρ a виться с увеличивающимся ненуҗным электрическим и электронным оборудованием , уменъшите использование закапывания мусора и использования установки для сжигания отходов , препятствуйте вредному выбросам загрязнять окружановки среду , Европейский союз (ec) установил Директиву ...
5 aec-6293m manual 1.4 os compatibility mac os 10.4 and above chapter 1 introduction 1.1 overview acard aec-6293m is a 32-bit/66mhz, 1-ch esata/ 1-ch sata/ 1-ch pata and high-performance pci to sata ii/ pata card for mac computer. Within acard’s latest cutting-edge single chip, the speed of its sata...
6 aec-6293m manual esata connector ide connector sata connector 1.5 package and others 1.5.1 package aec-6293m × 1 internal serial ata cable × 1 ide cable × 1 acard support cd × 1 user's manual × 1 1.5.2 spec parameters temperature: operation: -20°c to 60°c non-operation: -20°c to 60°c humidity: 0% ...
7 aec-6293m manual pci slot 4. Screw the aec-6293m onto the chassis 5. Connect aec-6293m with a sata/ ide hard drive via sata/ esata/ ide cable and connect the power cord to the hard drive properly. 6. Clost the chassis and power on the system. 7. If you have external esata system, connect aec-6293m...
Chapter 3 firmware update 1. Extract “6293m_1.04 updaterom utility” from “support cd\ide\6293m” to your local hard disk. 2. Open “acard update rom utility” program. 3. Selects acard6293m for update firmware. 8 aec-6293m manual 4. Selects current firmware to update and click “ok” to continue. 5. Afte...
Chapter 4 troubleshooting after installed aec-6293m, if it cannot work normally, please refer the checklist below to solve the problem. A. Mac cannot boot up after install aec-6293m hba. It could be: 1. Aec-6293m touch area with pci slot are not clean, please use rubber to clean touch area. 2. Insta...
Technical support form email address: support@acard.Com website: http://www.Acard.Com model name* (ex: aec-6293m) firmware version* system configuration motherboard/system model* scsi host adapter/chip brand & model* scsi host bios version other i/o card* operating system* sata hdd brand & model* sa...
